A fire alarm system notifies us of an emergency, to take action to protect ourselves, our employees, and the general public.
Fire detection systems identify fire early when there is still enough time for inhabitants to safely evacuate. Control actions begin while the fire is still minor, early detection helps to reduce property loss and operational disruption. Fire alarm systems transmit information about the location of the fire to emergency responders, speeding up the firefighting procedure.
Sounders go off to warn those within the building that there may be a fire. The fire alarm system could include a remote signal system. It would then notify the fire department via a central station.
-
GENT Rate of rise heat detector (800271)
RATE-OF-RISE HEAT DETECTOR:
Automatic heat detector with fast semiconductor sensor to
guarantee reliable detection of fires with rapidly rising temperatures
and integrated fixed temperature function for the detection of fires
with slowly rising temperatures. -
Gent Fixed heat detector-Class B(800177)
FIXED HEAT DETECTOR CLASS B:
For increased operating temperature according to EN 54-5 class B
The ES Detect automatic detector is an
non-addressable detector specifically
designed for operation on conventional
systems.
The range not only includes intelligent
algorithms for fire detection but also a
wide range of different types of detectors -
Gent Fixed heat detector (800171)
DESCRIPTION
Gent 800171 Conventional S-Quad Fixed Heat Detector
Manufactured by Gent, the Conventional S-Quad Fixed Heat Detector 800171 is an automatic heat detector with fast semi-conductor sensor for the reliable detection of fires with strong heat development. Process detector with decentralized intelligence, automatic function self-alarm and operating data storage and alarm indication. A remote indicator can also be connected
-
Gent Change Over Contact MCP
Gent Change Over Contact is a conventional manual call point, designed to provide a manual
alarm interface to conventional fire alarm control panels. All call points
are supplied in the standard red color and are available in semi-flush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent Key Operated, Surface Mounted C/W BackBox (XENS-807)
Our conventional manual call points are designed to provide a manual
alarm interface to conventional fi re alarm control panels. All call points
are supplied in the standard red colour and are available in semi-fl ush
mounting or surface mounting options. The manual call points are all with
a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the
standard unit by a yellow strip on the element which becomes visible when
activated. -
Gent S-Cubed Sounder/Red Body/ EP S3EP-S-R
S-Cubed incorporates sound, speech and an EN54-23 visual alarm
all in one device.
S-Cubed offers a comprehensive range of loop powered alarm
sounders with integrated voice and EN54-23 certified visual
alarms. Combined with flexible configuration from the fire
control panels, this loop powered device can give a differentiated
combination of audible and visual alarms for alert and general
evacuation. -
Gent S-Quad Anti-Ligature Base(ALD302)
The S-Quad Anti-Ligature ceiling mounted base provides additional safety
to occupants within secure facilities. This base has been designed to provide
additional safety within buildings that
accomodate people who are at risk. -
Gent by Honeywell FS20X Dual IR/UV Flame Detector (Aluminum) FS20X-211-23-6
Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap
in integrating Infrared and Ultraviolet sensing technologies. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS
and flame detector with a proven UV solar-blind sensor. FS20X delivers a faster response and fewer false alarms, performs in
a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors. -
Gent Loop Powered Interfaces(VSINTM-PCB-UPG)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.
Loop powered interfaces offer a cost effective solution with each device
individually addressed increasing the overal management capability of the
FD&A system.
Interfaces are either powered from the loop or require a separate mains
supply. The mains power version has its own battery backup. -
Gent Loop Powered Interfaces- Single Input(S4-34410)
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems.
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems. -
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB)
Description
GENT INTERFACE ENCLOSURE SMALL PLASTIC SURFACE MOUNT BOX (M200E-SMB) is a housing for Vigion’s loop powered interfaces. Vigilon’s range of loop powered interfaces offer a comprehensive range of connectivity options with critical plant and other safety systems. Vigilon can accommodate a high quantity of loop powered interface units offering fexible range of inputs and outputs from the FD&A system from plant control and signalling other systems in a fi re, to linking with other emergency management systems such as sprinklers or security systems. Loop powered interfaces offer a cost effective solution with each device individually addressed increasing the overal management capability of the FD&A system.
Interfaces are either powered from the loop or require a separate mains supply. The mains power version has its own battery backup. -
Gent by Honeywell VESDA-E VEA(VER-A40-40-STX)
DESCRIPTION
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors.COLOUR LCD DISPLAY
The VEA-040-A10 detector features a 3.5” colour LCD display which provides a range of status information including alarm and fault conditions as well as smoke level. Screens for each type of information are available using a simple navigation system.
VESDAnet™
VESDA detectors and devices communicate on VESDAnet which provides a
robust bi-directional communication network allowing continued redundant operation even during single point wiring failures. VESDAnet enables primary reporting, centralized configuration, control, maintenance and monitoring.
ETHERNET AND WIFI CONNECTIVITY
VESDA-E detectors offer Ethernet and WiFi connectivity as standard features. The detector can be added to a corporate network, allowing WiFi enabled tablet devices and laptops installed with Xtralis configuration software to connect
wirelessly to the detector via the network.
The VESDA-E VEA series of detectors
combine VESDA reliability and early warning smoke detection with pinpoint addressability and a variety of annunciation options that truly surpass traditional spot detectors
chat with us