- You cannot add that amount of "Gent Xenex 2 Zone Conventional Fire Alarm Panel" to the cart because there is not enough stock (0 remaining).
-
Gent Vigilon Network Card
-
High-speed panel-to-panel communication
-
Reliable fault detection and isolation capabilities
-
Support for complex zoning and phased evacuation strategies
-
Easy integration into BMS (Building Management Systems)
₦ 393,750.00₦ 412,500.00Gent Vigilon Network Card
₦ 393,750.00₦ 412,500.00 -
-
Gent Vigilon Loop Card
Key Features:
-
Supports connection of up to 200 devices per loop (panel-dependent)
-
Enables seamless integration of Gent intelligent devices
-
Ensures reliable two-way communication between devices and the control panel
-
Ideal for commercial, industrial, and large-scale installations
-
Easy installation and configuration with Gent Vigilon panels
Ensure smarter protection and system flexibility with the Gent Vigilon Loop Card — the backbone of an intelligent fire detection system.
₦ 399,525.00₦ 418,550.00Gent Vigilon Loop Card
₦ 399,525.00₦ 418,550.00 -
-
Gent S4-34440-02 Mains Powered Interface c/w batteries (Output rated 1.5A) 24V battery AUX Supply
The S4-34440-02 module has been designed to be installed in custom panel to provide supervisory input to control plant via Vigilon System. The module connects to a loop circuit of a Vigilon fire alarm control panel.
₦ 428,000.00₦ 455,000.00Gent S4-34440-02 Mains Powered Interface c/w batteries (Output rated 1.5A) 24V battery AUX Supply
₦ 428,000.00₦ 455,000.00 -
Gent Single Mode Fibre Network Card (VIG-NC-SMF)
The Single Mode Fibre Network Card (VIG-NC-SMF) allows a fast and reliable network over distances of up to 20km between Vigilon Plus Panels (VIGPLUS-24, VIGPLUS-72) / Network Nodes (VIGPLUS-NODE).
The Single Mode Fibre Network card is designed to plug into the backplane of a panel or node in dedicated slots.
Fibre optic connects directly to the sockets on the card.
Up to 31 panels/nodes on a single network.
Up to 200 panels/nodes on a complex networks.₦ 440,000.00Gent Single Mode Fibre Network Card (VIG-NC-SMF)
₦ 440,000.00 -
SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
Telescopic extension for plastic telescopic rod (Part No. 060427). Up to 3 telescopic extensions
can be attached to the telescopic rod. The maximum height that can be reached is increased to 9
m.₦ 475,000.00₦ 520,000.00SOLO100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres
₦ 475,000.00₦ 520,000.00 -
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit (Stainless Steel)
Gent VIG-FLUSH-SS Vigilon Main Control Panel Flush Mounting Kit
₦ 540,000.00 -
Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
Gent S4-34740 Addressable Beam Sensor Pair
Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensors Pair provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.
₦ 580,000.00₦ 660,000.00Gent Beam Sensors Pair (Transmitter And Receiver), Excluding Bracket and Base (S4-34740)
₦ 580,000.00₦ 660,000.00 -
Gent VIG-BSKIT Conversion Kit for VIG1-24 EN 54 to BS / V3+ Functionality
Gent VIG-BSKIT Conversion Kit for VIG1-24 EN 54 to BS / V3+ Functionality
The VIG-BSKIT is a Conversion Kit for VIG1-24 EN 54 to BS / V3+ functionality
₦ 610,000.00 -
Gent Xenex 2 Zone Conventional Fire Alarm Panel
FEATURES
-
-
Gent Xenex 13270-02LB
-
2 sounder circuits
-
1A sounder circuit max load
-
Conforms to EN54: parts 2 & 4
-
On-board relay
-
Fire and fault relay expansion card optional
-
Easy configuration
-
Class change input
-
₦ 624,750.00₦ 630,000.00Gent Xenex 2 Zone Conventional Fire Alarm Panel
₦ 624,750.00₦ 630,000.00 -
-
Gent VIGPLUS-MCC MCC Control Card for Vigilon Plus
DESCRIPTION
Gent VIGPLUS-MCC MCC Control Card for Vigilon Plus
The VIGPLUS-MCC is a MCC Control Card designed for use with the VIGPLUS-24 & VIGPLUS-72 (EN54)
Key Features
- Comes with Micro SD flash memory card
₦ 650,500.00₦ 690,000.00Gent VIGPLUS-MCC MCC Control Card for Vigilon Plus
₦ 650,500.00₦ 690,000.00 -
Gent VIG-MCC-EN Vigilon Main Control Card EN54 Zonal Display
Gent VIG-MCC-EN Vigilon Main Control Card EN54 Zonal Display
The Gent VIG-MCC-EN is a replacement main control card EN54 zonal display for use with the Gent Vigilon panel.
₦ 651,000.00₦ 690,000.00Gent VIG-MCC-EN Vigilon Main Control Card EN54 Zonal Display
₦ 651,000.00₦ 690,000.00
chat with us