Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.

Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.

Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.

  •  223,650.00 234,300.00

    AH Infrared Flame Detector, 2 wire

     223,650.00 234,300.00
  • CTEC 2 Zone Plastic Fire Alarm Control Panel

    ✅ Cost-effective and user-friendly
    ✅ Supports conventional fire alarm systems
    ✅ LED indicators for easy monitoring
    ✅ Fully compliant with BS EN54 standards
    ✅ Compact and lightweight design for easy installation
    Whether you’re upgrading an existing system or installing a new one, the CTEC 2 Zone Fire Alarm Panel delivers unmatched performance and peace of mind.
     223,125.00 233,750.00

    CTEC 2 Zone Plastic Fire Alarm Control Panel

     223,125.00 233,750.00
  • C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).

    • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.

    • Manufactured by C-TEC in the UK.

    • Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.

    • Four conventional sounder circuits.

    • Integral 1.5A EN54-4/A2 compliant switch mode PSU.

    • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

    • Two on-board relays (Fire and Fault).

    • Two open-collector outputs (Remote and Reset).

    • ‘Class change’ and alert inputs.

    • Installer-friendly design.

    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

    • Low 25mA quiescent current.

    • Multiple indicators.

    • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).

    • Space for two x 12V 3.3Ah VRLA batteries.

     222,000.00 250,000.00
  • GPS320 Guard Patrol Tour Stick with LED Light

    🔐 Key Features:

    *Bright LED light to assist with nighttime or dark-area patrols
    *Rugged, waterproof, and impact-resistant design built for real-world conditions
    *Fast data transfer via USB with clear reporting for supervisors
    *Simple one-button RFID checkpoint scans
    *Long-lasting rechargeable battery for extended patrol shifts
    *Tamper-proof system for guaranteed authenticity of guard routes

    Why Choose the GPS320 Guard Tour System?

    With real-time tracking and reliable data capture, the GPS320 helps you manage guard movements, reduce supervision workload, and improve response time. It’s trusted by security professionals across Nigeria for its durability, accuracy, and ease of use.

     199,500.00 209,000.00

    GPS320 Guard Patrol Tour Stick with LED Light

     199,500.00 209,000.00
  • Gent S4-34760-99 S-Quad Duct Mounting Bracket

    Gent S4-34760-99 S-Quad Duct Mounting Bracket The S4-34760-99 is a Mounting Bracket designed for the S-Quad Duct Smoke Sensor.

     196,500.00 200,000.00

    Gent S4-34760-99 S-Quad Duct Mounting Bracket

     196,500.00 200,000.00
  • C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).

    • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.

    • Manufactured by C-TEC in the UK.

    • Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.

    • Four conventional sounder circuits.

    • Integral 1.5A EN54-4/A2 compliant switch mode PSU.

    • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

    • Two on-board relays (Fire and Fault).

    • Two open-collector outputs (Remote and Reset).

    • ‘Class change’ and alert inputs.

    • Installer-friendly design.

    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

    • Low 25mA quiescent current.

    • Multiple indicators.

    • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).

    • Space for two x 12V 3.3Ah VRLA batteries.

     195,000.00 200,000.00
  • Gent S4-34760-15 1.5m Venturi Tube

    Gent S4-34760-15 1.5m Venturi Tube

    The S4-34760-15 is a Venturi Tube designed for use with Duct Smoke Sensors.

     

     190,000.00 195,000.00

    Gent S4-34760-15 1.5m Venturi Tube

     190,000.00 195,000.00
  • C-TEC Economy Status Unit Part No. EP211

        • Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.

        • Includes a mode (auto/manual) keyswitch.

        • Mounts on a standard UK single gang 25mm flush or surface back box.

        • Max. 8 economy status units per EP203 panel.

     156,000.00 159,000.00

    C-TEC Economy Status Unit Part No. EP211

     156,000.00 159,000.00
  • Zeta Addressable Raptor Sounder Flasher Outdoor

    Powerful Sound Output – Emits a loud, penetrating alarm to ensure warnings are heard clearly across open spaces and noisy outdoor settings.
    High-Intensity Flashing Beacon – Bright red LED strobe grabs attention instantly, even in broad daylight or poor weather conditions.
    Fully Addressable – Seamlessly integrates with addressable fire alarm control panels, allowing precise location tracking and easy fault diagnostics.
    Weatherproof & Durable – Built tough for the outdoors with a high IP rating, it’s resistant to rain, dust, and temperature extremes.
    Reliable Life Safety Device – Ideal for warehouses, industrial plants, car parks, building exteriors, and any environment where safety cannot be compromised.
    With the Zeta Raptor Outdoor Sounder Flasher, you’re not just installing a device—you’re investing in smart, dependable protection for people and property.
    When every second counts, make your alarm system impossible to ignore.
     137,550.00 144,100.00

    Zeta Addressable Raptor Sounder Flasher Outdoor

     137,550.00 144,100.00
  •  120,000.00 125,000.00
  • C-TEC FP 8 Zone Economy Conventional Fire Alarm Panel Part No. FF388-3

     120,000.00
  • Beam Sensor 250m – Advanced Perimeter Protection

    Functions & Features:

    • 📡 250m Detection Range: Perfect for outdoor perimeter security.

    • 🌧️ Weatherproof Design: Built to withstand rain, dust, and harsh conditions.

    • 🔊 Instant Alarm Triggering: Sends immediate alerts when the beam is interrupted.

    • 🔄 Adjustable Beam Alignment: Ensures precise coverage and reduced false alarms.

    • Low Power Consumption: Energy-efficient with high performance.

    • 🛠️ Easy Installation: Compatible with most alarm systems and CCTV setups.

    Ideal for homes, schools, offices, banks, warehouses, estates, and restricted zones.

     115,500.00 117,500.00
chat with us
1
Select your currency
NGN Nigerian naira

Main Menu