Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.
Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.
Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.
-
Gent 07011-40 Optical Beam Reflective 50-100m
– Combined transmitter and receiver unit in one discrete unit
– Range 50-100 Metres
– Low current consumption
– Automatic self check drift compensation
– Selectable sensitivity/threshold levels
– Selectable latching / non latching fire alarm
– LED indicators to aid the alignment process
– Optional Low Level Test Unit for UL models only₦ 350,000.00Buy nowGent 07011-40 Optical Beam Reflective 50-100m
₦ 350,000.00 -
Zeta 1 Zone Panel
🔧 Key Features:
-
Single Zone Monitoring: Supports one detection zone, perfect for focused fire protection in small areas.
-
LED Indicators: Clear visual alerts for fire, fault, power, and system status.
-
Sounder Circuit: Integrated sounder output for activating alarms or sirens.
-
Battery Backup Compatible: Ensures system continues operating during power outages.
-
User-Friendly Interface: Simple controls for easy operation and quick system resets.
✅ Benefits:
-
Affordable Fire Safety: A budget-friendly choice without compromising reliability.
-
Quick Installation: Minimal wiring and intuitive setup for faster deployment.
-
Compliance: Meets industry safety standards for peace of mind.
₦ 318,150.00₦ 320,000.00Buy nowZeta 1 Zone Panel
₦ 318,150.00₦ 320,000.00 -
-
Zeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
✅ Key Advantages:
-
🔒 Single-Zone Monitoring: Ideal for focused protection in compact facilities, offices, shops, or residential complexes.
-
⚡ Quick Response System: Delivers real-time fire alerts for faster evacuation and emergency action.
-
🔧 User-Friendly Interface: Easy to install, operate, and maintain — no tech stress!
-
🔌 Compatibility: Works seamlessly with most conventional fire detectors and call points.
-
🛡️ Built to Last: Robust, durable design backed by Zeta’s trusted quality.
-
🧯 Cost-Effective Safety: High-performance fire protection at an affordable price.
🔗 Secure your building today with reliable fire detection.
🛒 Available now at Trends Ventures Limited.₦ 308,700.00₦ 309,700.00Buy nowZeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
₦ 308,700.00₦ 309,700.00 -
-
C-TEC Flushing Mount Remote Status Unit Part No. EP210F
-
-
-
-
Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
-
Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
-
Three monitored input connections (Hold, Abort and Mode).
-
Max. 8 remote status units per EP203 panel.
-
Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
-
-
-
₦ 300,000.00₦ 320,000.00Buy nowC-TEC Flushing Mount Remote Status Unit Part No. EP210F
₦ 300,000.00₦ 320,000.00 -
-
C-TEC CFP 8 Zone Repeater Panel Part No. CFP760
-
-
Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
-
Up to 8 repeaters per CFP master.
-
Includes its own Mains power supply that requires its own standby battery supply.
-
Provides the user with access to all AL1 and AL2 functions.
-
Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
-
Communicates over screened two-wire fire resistant cable.
-
Total repeater network cable length should not exceed 1KM.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
₦ 295,000.00₦ 300,000.00Buy nowC-TEC CFP 8 Zone Repeater Panel Part No. CFP760
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 295,000.00₦ 300,000.00Buy nowC-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
₦ 295,000.00₦ 300,000.00 -
-
Gent Duct Smoke-Sensor Housing (S4-34760 )
Gent Duct Smoke-Sensor Housing – S4-34760 is specifically designed for use in ventilation ducting. It is mounted externally to the duct, the device uses venturi probe technology to sample the air for smoke. If smoke is detected, the device triggers the shut down of air-conditioning or ventilation systems to isolate the hazard and prevent it from spreading.
₦ 295,000.00Buy nowGent Duct Smoke-Sensor Housing (S4-34760 )
₦ 295,000.00 -
Gent S4-34741 Beam Sensor Transmitter
Gent S4-34741 Beam Sensor Transmitter
The S4-34741 from Gent is a Beam Sensor Emitter.
Vigilon’s loop-powered technology allows up to 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m without the need for an external Power Supply Unit, wiring, or interfacing.
₦ 270,000.00₦ 300,000.00Buy nowGent S4-34741 Beam Sensor Transmitter
₦ 270,000.00₦ 300,000.00 -
GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
Gent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)
BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.
Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.
Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.
₦ 255,000.00₦ 265,000.00Buy nowGENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)
₦ 255,000.00₦ 265,000.00 -
Zeta Fire Alarm Duct Unit c/w 230V Relay Board (ZT-DU/230)
- Fire and Fault relays
- Option for latching or non-latching
- Manual reset (latching option)
₦ 250,000.00Buy now -
C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 222,000.00₦ 250,000.00Buy nowC-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel
₦ 222,000.00₦ 250,000.00 -
-
Gent S4-34760-99 S-Quad Duct Mounting Bracket
Gent S4-34760-99 S-Quad Duct Mounting Bracket The S4-34760-99 is a Mounting Bracket designed for the S-Quad Duct Smoke Sensor.
₦ 196,500.00₦ 200,000.00Buy nowGent S4-34760-99 S-Quad Duct Mounting Bracket
₦ 196,500.00₦ 200,000.00
