Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.
Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.
Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.
-
ZETA 24V Telephone Auto Dialer With Enclosure SD-830K
- Dials stored telephone numbers when alarm input is received from a fire system
-
Zeta Magnetic Door Holder 240V
-
Technical Specification
- Model: ZT-DR24 / ZT-DR240
- Rated Voltage: 24V DC or 240VAC
- Rated Current: 35mA
- Switch Through AUX: Yes (with Diode)
- Needs Back EMF Diode: Yes
- Holding Force: 200 Newton
- Dimensions (Main Unit Only) (W x H x D mm): 110 x 85 x 38
- Dimensions (Keeper Plate) (W x H x D mm): 55 x 55 x 50
- Fixing Centres: 50 mm
- Weight: 404g
-
-
Zeta Magnetic Door Holder Floor Bracket (ZT-BR)
An optional bracket for floor or wall mounting the Zeta ZT-DR24 & ZT-DR240.
-
ZETA ZT-CP3 | Weatherproof Manual Release Unit (Surface Mount)
The ZT-CP3 and ZT-CP3/WP call points are unique in that they mimic the feel of breaking glass whilst offering the user the benefits and environmental advantages of a re-settable operating element
-
ZETA CP3-FMB/W | Abort Call Point Flush Mount Bezel
The ZT-CP3 and ZT-CP3/WP call points are unique in that they mimic the feel of breaking glass whilst offering the user the benefits and environmental advantages of a re-settable operating element.
-
ZETA CP3-FMB/R | Abort Call Point Flush Mount Bezel
The Zeta CP3-FMB is a flush mounting bezel for the ID2 & CP3 manual call points.
-
ZETA ZP-CP4 | CP4 Conventional Surface Mount Manual Call Point, Red
Technical Specification
- Current Rating: 3 Amps 12 – 24V DC
- Low Current Rating: 1-100 mA
- Housing and Mounting Box Material: Polycarbonate
- Electrical Contact Material: Silver plated brass
- Operating Temperature: -20 degrees C to +65 degrees C
- Installation Terminal Conductor: Size 0.5mm – 2.5mm
- Colour: Red
- Mounting: Surfacce (with supplied back box) or Flush (optional flush mount bezel CP3-FMB required)
- IP Rating: IP32
-
ZETA ZP-CP4/W | CP4 Conventional Surface Mount Manual Call Point, White
Technical Specification
- Current Rating: 3 Amps 12 – 24V DC
- Low Current Rating: 1-100 mA
- Housing and Mounting Box Material: Polycarbonate
- Electrical Contact Material: Silver plated brass
- Operating Temperature: -20 degrees C to +65 degrees C
- Installation Terminal Conductor: Size 0.5mm – 2.5mm
- Colour: Red
- Mounting: Surfacce (with supplied back box) or Flush (optional flush mount bezel CP3-FMB required)
- IP Rating: IP32
-
ZETA ZP-CP4/G | CP4 Conventional Surface Mount Manual Call Point, Green
Technical Specification
- Current Rating: 3 Amps 12 – 24V DC
- Low Current Rating: 1-100 mA
- Housing and Mounting Box Material: Polycarbonate
- Electrical Contact Material: Silver plated brass
- Operating Temperature: -20 degrees C to +65 degrees C
- Installation Terminal Conductor: Size 0.5mm – 2.5mm
- Colour: Red
- Mounting: Surfacce (with supplied back box) or Flush (optional flush mount bezel CP3-FMB required)
- IP Rating: IP32
-
ZETA FEUV2000 | Fyreye Ultra-Violet Flame Detector With Base
The Fyreye ultra-violet flame detector is particularly suited to applications where flames can be expected to develop initially rather than smoke. This is typically due to the nature of the materials being protected for instance camera film, computer, audio & video tapes or disks.
-
ZETA Explosion Proof Manual Break Glass Unit (ZTBG-EXD)
The ZTBG/EXD explosion-proof fire alarm control is a station with an integral terminal chamber. A push button actuator with a mushroom head is provided in the main chamber. This actuator is in constant contact with a glass cover which when broken activates the alarm. A single contact element in the main chamber is wired to terminals in the terminal chamber through sealed explosion proof bushings. The alarm station is provided with gaskets for weather proof protection.
