Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.

Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.

Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.

  • Zeta Raptor Addressable Weatherproof Sounder Beacon (Red Plastic, White Flash)

    🛡️ Key Advantages & Functions:

    • Addressable System Compatibility: Integrates seamlessly into addressable fire alarm systems.

    • Weatherproof Design (IP65 Rated): Built to withstand rain, dust, and outdoor elements.

    • High Volume Sounder: Emits a powerful audio alert up to 100dB for immediate attention.

    • Bright White LED Flash: Ensures visibility in smoke, fog, and low-light conditions.

    • Durable Red Plastic Housing: Tough, high-visibility design for quick identification.

    • Low Current Consumption: Efficient and cost-effective operation.

    • Multiple Tone & Volume Settings: Customizable to suit your site’s safety needs.

    Whether it’s a fire, gas leak, or emergency evacuation, the Zeta Raptor Weatherproof Sounder Beacon delivers unmatched performance when it matters most.

    🛒 Get yours today at Trends Ventures Limited – your trusted safety partner.

     133,350.00 135,000.00
    Buy now
  • Zeta Addressable Raptor Sounder Flasher Outdoor

    Powerful Sound Output – Emits a loud, penetrating alarm to ensure warnings are heard clearly across open spaces and noisy outdoor settings.
    High-Intensity Flashing Beacon – Bright red LED strobe grabs attention instantly, even in broad daylight or poor weather conditions.
    Fully Addressable – Seamlessly integrates with addressable fire alarm control panels, allowing precise location tracking and easy fault diagnostics.
    Weatherproof & Durable – Built tough for the outdoors with a high IP rating, it’s resistant to rain, dust, and temperature extremes.
    Reliable Life Safety Device – Ideal for warehouses, industrial plants, car parks, building exteriors, and any environment where safety cannot be compromised.
    With the Zeta Raptor Outdoor Sounder Flasher, you’re not just installing a device—you’re investing in smart, dependable protection for people and property.
    When every second counts, make your alarm system impossible to ignore.
     137,550.00 139,550.00

    Zeta Addressable Raptor Sounder Flasher Outdoor

     137,550.00 139,550.00
    Buy now
  • C-TEC Economy Status Unit Part No. EP211

        • Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.

        • Includes a mode (auto/manual) keyswitch.

        • Mounts on a standard UK single gang 25mm flush or surface back box.

        • Max. 8 economy status units per EP203 panel.

     156,000.00 159,000.00

    C-TEC Economy Status Unit Part No. EP211

     156,000.00 159,000.00
    Buy now
  • Gent Xenex 13271-08LB 8 Zone Conventional Repeater Panel

    The Gent Xenex 13271-08LB repeater panel is for use with the Xenex range of control panels. Compatible with the 2,4 or 8 zone Xenex panel the repeater offers full system control and indication from a remote location within the building.

     172,000.00
    Buy now
  • Gent S4-34760-15 1.5m Venturi Tube

    Gent S4-34760-15 1.5m Venturi Tube

    The S4-34760-15 is a Venturi Tube designed for use with Duct Smoke Sensors.

     

     190,000.00 195,000.00

    Gent S4-34760-15 1.5m Venturi Tube

     190,000.00 195,000.00
    Buy now
  • C-TEC CFP AlarmSense 2 Zone Two-Wire Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).

    • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.

    • Manufactured by C-TEC in the UK.

    • Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.

    • Four conventional sounder circuits.

    • Integral 1.5A EN54-4/A2 compliant switch mode PSU.

    • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

    • Two on-board relays (Fire and Fault).

    • Two open-collector outputs (Remote and Reset).

    • ‘Class change’ and alert inputs.

    • Installer-friendly design.

    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

    • Low 25mA quiescent current.

    • Multiple indicators.

    • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).

    • Space for two x 12V 3.3Ah VRLA batteries.

     195,000.00 200,000.00
    Buy now
  • Gent S4-34760-99 S-Quad Duct Mounting Bracket

    Gent S4-34760-99 S-Quad Duct Mounting Bracket The S4-34760-99 is a Mounting Bracket designed for the S-Quad Duct Smoke Sensor.

     196,500.00 200,000.00

    Gent S4-34760-99 S-Quad Duct Mounting Bracket

     196,500.00 200,000.00
    Buy now
  • C-TEC CFP AlarmSense 4 Zone Two-Wire Fire Alarm Panel

    • Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).

    • Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.

    • Manufactured by C-TEC in the UK.

    • Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.

    • Four conventional sounder circuits.

    • Integral 1.5A EN54-4/A2 compliant switch mode PSU.

    • Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

    • Two on-board relays (Fire and Fault).

    • Two open-collector outputs (Remote and Reset).

    • ‘Class change’ and alert inputs.

    • Installer-friendly design.

    • Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

    • Low 25mA quiescent current.

    • Multiple indicators.

    • System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).

    • Space for two x 12V 3.3Ah VRLA batteries.

     222,000.00 250,000.00
    Buy now
  • Zeta Fire Alarm Duct Unit c/w 230V Relay Board (ZT-DU/230)

    • Fire and Fault relays
    • Option for latching or non-latching
    • Manual reset (latching option)
     250,000.00
    Buy now
  • GENT 8 ZONE REPEAT INDICATOR, LESS BATTERIES (13271-08LB)

    Gent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)

    BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.

    Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.

    Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.

     255,000.00 265,000.00
    Buy now
  • Gent S4-34741 Beam Sensor Transmitter

    Gent S4-34741 Beam Sensor Transmitter

    The S4-34741 from Gent is a Beam Sensor Emitter.

    Vigilon’s loop-powered technology allows up to 16 beam pairs to be connected to the same loop circuit, each covering a distance of up to 100m without the need for an external Power Supply Unit, wiring, or interfacing.

     270,000.00 300,000.00

    Gent S4-34741 Beam Sensor Transmitter

     270,000.00 300,000.00
    Buy now
  • Gent Duct Smoke-Sensor Housing (S4-34760 )

    Gent Duct Smoke-Sensor Housing – S4-34760 is specifically designed for use in ventilation ducting. It is mounted externally to the duct, the device uses venturi probe technology to sample the air for smoke. If smoke is detected, the device triggers the shut down of air-conditioning or ventilation systems to isolate the hazard and prevent it from spreading.

     295,000.00
    Buy now
Select your currency
NGN Nigerian naira
Shopping cart0
There are no products in the cart!
Continue shopping
0

Cart

Your Cart is Empty

Back To Shop

Main Menu