Conventional Fire Alarm System employs one or more initiating circuits linked to sensors wired in parallel. The number of such circuits used limits the information density. Best utilized for smaller applications, a conventional fire alarm remains a viable fire protection solution.
Conventional fire alarm system use zones. Multiple devices, both initiating and notification devices, make up a zone that connects to the main control panel. Conventional systems are analog in that they use electrical currents to communicate with the control panel.
Conventional system relies on individual circuits to communicate with the control panel. The panel’s ability to receive information limited by the number of devices it can support.
-
C-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
-
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
-
Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
-
Manufactured by C-TEC in the UK.
-
Eight AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
-
Four conventional sounder circuits.
-
Integral 1.5A EN54-4/A2 compliant switch mode PSU.
-
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
-
Two on-board relays (Fire and Fault).
-
Two open-collector outputs (Remote and Reset).
-
‘Class change’ and alert inputs.
-
Installer-friendly design.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
Low 25mA quiescent current.
-
Multiple indicators.
-
System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
-
Space for two x 12V 3.3Ah VRLA batteries.
₦ 295,000.00₦ 300,000.00Buy nowC-TEC CFP AlarmSense 8 Zone Two-Wire Fire Alarm Panel
₦ 295,000.00₦ 300,000.00 -
-
C-TEC CFP 8 Zone Repeater Panel Part No. CFP760
-
-
Can be used to repeat the functions of a master CFP standard or AlarmSense 2-8 zone fire panel at remote parts of site (e.g. all potential fire service entrances).
-
Up to 8 repeaters per CFP master.
-
Includes its own Mains power supply that requires its own standby battery supply.
-
Provides the user with access to all AL1 and AL2 functions.
-
Master/Repeater communication achieved using CFP761 network driver cards (one CFP761 is supplied with the Repeater, an additional CF761 card is required at the master CFP).
-
Communicates over screened two-wire fire resistant cable.
-
Total repeater network cable length should not exceed 1KM.
-
Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
-
₦ 295,000.00₦ 300,000.00Buy nowC-TEC CFP 8 Zone Repeater Panel Part No. CFP760
₦ 295,000.00₦ 300,000.00 -
-
C-TEC Flushing Mount Remote Status Unit Part No. EP210F
-
-
-
-
Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
-
Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
-
Three monitored input connections (Hold, Abort and Mode).
-
Max. 8 remote status units per EP203 panel.
-
Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
-
-
-
₦ 300,000.00₦ 320,000.00Buy nowC-TEC Flushing Mount Remote Status Unit Part No. EP210F
₦ 300,000.00₦ 320,000.00 -
-
Zeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
✅ Key Advantages:
-
🔒 Single-Zone Monitoring: Ideal for focused protection in compact facilities, offices, shops, or residential complexes.
-
⚡ Quick Response System: Delivers real-time fire alerts for faster evacuation and emergency action.
-
🔧 User-Friendly Interface: Easy to install, operate, and maintain — no tech stress!
-
🔌 Compatibility: Works seamlessly with most conventional fire detectors and call points.
-
🛡️ Built to Last: Robust, durable design backed by Zeta’s trusted quality.
-
🧯 Cost-Effective Safety: High-performance fire protection at an affordable price.
🔗 Secure your building today with reliable fire detection.
🛒 Available now at Trends Ventures Limited.₦ 308,700.00₦ 309,700.00Buy nowZeta Infinity 8 Conventional 1 Zone Fire Alarm Panel IN1
₦ 308,700.00₦ 309,700.00 -
-
Zeta 1 Zone Panel
🔧 Key Features:
-
Single Zone Monitoring: Supports one detection zone, perfect for focused fire protection in small areas.
-
LED Indicators: Clear visual alerts for fire, fault, power, and system status.
-
Sounder Circuit: Integrated sounder output for activating alarms or sirens.
-
Battery Backup Compatible: Ensures system continues operating during power outages.
-
User-Friendly Interface: Simple controls for easy operation and quick system resets.
✅ Benefits:
-
Affordable Fire Safety: A budget-friendly choice without compromising reliability.
-
Quick Installation: Minimal wiring and intuitive setup for faster deployment.
-
Compliance: Meets industry safety standards for peace of mind.
₦ 318,150.00₦ 320,000.00Buy nowZeta 1 Zone Panel
₦ 318,150.00₦ 320,000.00 -
-
Gent 07011-40 Optical Beam Reflective 50-100m
– Combined transmitter and receiver unit in one discrete unit
– Range 50-100 Metres
– Low current consumption
– Automatic self check drift compensation
– Selectable sensitivity/threshold levels
– Selectable latching / non latching fire alarm
– LED indicators to aid the alignment process
– Optional Low Level Test Unit for UL models only₦ 350,000.00Buy nowGent 07011-40 Optical Beam Reflective 50-100m
₦ 350,000.00 -
ZT-500EX Zeta ATEX Approved Triple IR (IR3) Flame Detector
-
- Triple IR Spectrum – for longer distance detection and high false alarm immunity
- Compact and lightweight design
- User Selectable (Senitivity/Functions)
- Multiple output options
- Relays for Alarm and Fault
- 0-20mA (stepped)
- RS-485/RS-232 spectrum monitoring
- Lower power requirement (35mA – standby / 75mA – alarm)
- Ex cable gland /2 metre cable assembled & provided for users’ easy installation
- Certifications
- ATEX approved by DNV for explosion-proof
- CE marking
- Certifications
₦ 350,000.00Buy now -
-
Zeta Infinity 8 Conventional 2 Zone Fire Alarm Panel IN2
🔒 Advantages:
-
✅ Supports up to 2 detection zones – ideal for compartmentalized monitoring
-
✅ LED indicators for instant status updates
-
✅ Easy installation and intuitive user interface
-
✅ Compatible with a wide range of conventional detectors and devices
-
✅ Built-in fault monitoring and zone isolation functions
-
✅ Compact, sleek design fits any control room or wall space
-
✅ Manufactured by Zeta Alarm Systems – trusted worldwide
Perfect for schools, small offices, retail spaces, and more.
🛒 Get protected today — choose smart, choose Zeta Infinity 8.
₦ 362,775.00₦ 370,000.00Buy nowZeta Infinity 8 Conventional 2 Zone Fire Alarm Panel IN2
₦ 362,775.00₦ 370,000.00 -
-
Zeta Infinity 8 Conventional 4 Zone-Fire-Alarm-Panel IN4
✅ Key Advantages:
-
🚨 4-Zone Fire Monitoring: Effectively covers up to four separate detection areas for enhanced protection.
-
🔄 User-Friendly Interface: Simple, intuitive controls make operation and maintenance hassle-free.
-
⚡ High Reliability: Advanced detection algorithms reduce false alarms and increase system accuracy.
-
🔒 Built-in Safety Features: Includes fault monitoring and alert system to ensure constant readiness.
-
🔧 Flexible Integration: Compatible with a wide range of conventional fire detection devices.
-
🛠️ Easy Installation: Compact design and clear labeling for quick setup by professionals.
Whether for offices, schools, shops, or small complexes, the Zeta Infinity 8 is your smart choice for dependable fire safety.
📦 Available now at Trends Ventures Limited
₦ 427,350.00₦ 430,000.00Buy nowZeta Infinity 8 Conventional 4 Zone-Fire-Alarm-Panel IN4
₦ 427,350.00₦ 430,000.00 -
-
ZETA EX-PRO | Premier EX Pro Extinguishing Panel
Why Choose the ZETA EX-PRO?
✅ Advanced Detection & Suppression – Supports up to 3 detection zones with automatic or manual extinguishing activation.
✅ User-Friendly Interface – Intuitive LCD display and straightforward controls for ease of operation and monitoring.
✅ Flexible Configuration – Compatible with a wide range of extinguishing agents, from FM200 to CO₂ and more.
✅ Built-In Event Log – Keep track of system events with an internal memory log for better diagnostics and compliance.
✅ Reliable Performance – Built to meet the latest international fire safety standards (EN12094-1).
✅ Fail-Safe Security – Multiple levels of fault monitoring and system status indicators for full control and peace of mind.
✅ Customizable Delays & Alerts – Pre-discharge warnings and programmable timers to suit your environment’s unique needs.Whether you’re securing data centers, industrial spaces, or high-risk facilities, the ZETA EX-PRO delivers unmatched safety, smart technology, and unwavering reliability.
🛡️ Premier Protection Starts Here.
₦ 450,000.00₦ 470,000.00Buy nowZETA EX-PRO | Premier EX Pro Extinguishing Panel
₦ 450,000.00₦ 470,000.00 -
Zeta Infinity 8 Conventional 6 Zone-Fire-Alarm-Panel IN6
🔒 Key Advantages:
-
🔥 Supports up to 6 independent fire detection zones – ideal for sectional monitoring
-
🛠️ Easy installation & user-friendly interface – reduces setup and training time
-
🚨 Clear LED indicators – instant visual status updates
-
🧠 Advanced fault diagnostics – quickly identify and resolve issues
-
🔁 Compatible with a wide range of conventional detectors & devices
-
🔌 Battery backup support – ensures continued operation during power failures
-
🏢 Ideal for schools, offices, hotels, factories, and retail spaces
Secure peace of mind with the Zeta Infinity 8.
🛒 Now available at Trends Ventures Limited₦ 456,750.00₦ 460,000.00Buy nowZeta Infinity 8 Conventional 6 Zone-Fire-Alarm-Panel IN6
₦ 456,750.00₦ 460,000.00 -
