Category
- Burglary Alarm System
- Cable
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
- Promotions
Popular
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦6,250,000.00Original price was: ₦6,250,000.00.₦6,170,000.00Current price is: ₦6,170,000.00. -
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦22,000.00Original price was: ₦22,000.00.₦18,500.00Current price is: ₦18,500.00. -
PAXTON ACCESS CONTROL NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET
₦462,000.00Original price was: ₦462,000.00.₦458,000.00Current price is: ₦458,000.00. -
Concept Handheld Metal Detector with Vibration Function
₦20,000.00Original price was: ₦20,000.00.₦19,000.00Current price is: ₦19,000.00. -
Fisher Research Labs M-scope Walk-Through Metal Detector
₦4,600,000.00Original price was: ₦4,600,000.00.₦4,500,000.00Current price is: ₦4,500,000.00. -
CONCEPT (Burglar Alarm) WIRELESS SIGNAL REPEATER
₦23,500.00Original price was: ₦23,500.00.₦21,500.00Current price is: ₦21,500.00. -
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00Original price was: ₦13,000.00.₦11,000.00Current price is: ₦11,000.00.
Category: Fire Alarm System
Showing 65–80 of 460 results
-
Out of Stock
APOLLO Addressable Fire Alarm XPERT 7 BASE 4″ – ISOLATING
Read moreThe base senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits.
- Detects wiring short-circuits
- High brightness LED
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
-
APOLLO ADDRESSABLE FIRE ALARM XPERT 7 BASE 45681-210APO
₦4,500.00Original price was: ₦4,500.00.₦3,700.00Current price is: ₦3,700.00.Add to cartThe XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation.
- XPERT addressing
- XPERT cards supplied with all bases
- Locking feature to prevent unauthorised detector removal
- Ideal for the XP95 and Discovery detector ranges
-
Out of Stock
APOLLO Addressable Fire Alarm XPERT 7 BASE 6″
Read moreAll detectors in the XP95A product line fit the XP95A Mounting Base which is a low insertion force base with stainless steel contacts for the detector terminals. XPERT Cards are supplied with all bases.
- XPERT addressing
- One-way fit
- Locking feature to prevent unauthorised removal
-
Out of Stock
APOLLO Addressable Fire DIN-RAIL MINI SWITCH MONITOR MODULE XP95A
Read moreThe XP95A DIN-Rail Mini Switch Monitor Module is used to monitor one or more single pole, volt free contacts connected on a single pair of cables and report status to fire control panel.
- EN 54-17 & EN 54-18 Certified
- Designed for use where space is limited
- Allows DIN-Rail mounting
- Priority and non-priority settings
- Pre-alarm’ status available
- XP95, Discovery compatible
-
Out of Stock
APOLLO ADDRESSBLE FIRE XP95 OPEN-AREA VID – WHITE BODY (WHITE FLASH) – ISOLATING 55000-010APO
₦0.00Read moreThe XP95 Open-Area VID is a local-area visual indicator designed for indoor use. The visual indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.
- High intensity LEDs
- More reliable than xenon visual indicators
- Automatic LED check
- Lockable
- Wide angle of visibility
- Enables DDA compliance
- Synchronised flash
- Can be used with Discovery or XP95
-
Out of Stock
APOLLO FIRE ALARM ADDRESSABLE DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO
₦0.00Read moreThe Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.
- Suitable for weatherproof applications
- Reports an alarm in under 0.2 seconds
- ‘Plug and Play’ terminal connections for faster wiring
- Continuity link for wiring test before commissioning
- XP95 & Discovery compatible
-
Out of Stock
APOLLO Fire Alarm Discovery UL Manual Pull Station – Dual Action
Read moreThe Discovery UL Manual Pull Station is used to manually initiate an alarm signal on the fire detection system.
- UL38 Certified
- Reports an alarm in under 0.2 seconds
- Key lock
- Easily resettable
- Suitable for semi flush or surface mounting
- XP95, (Discovery and CoreProtocol compatible)
-
Out of Stock
APOLLO ISOLATOR BASE
Read moreThe Isolator Base is unique and designed to only accept the Isolator 55000-720.
-
Out of Stock
APOLLO SOTERIA UL BASE 4”
Read moreThe Soteria UL Base – 4″ base is an easy-fit 4″ base, compatible with Apollo’s latest Soteria UL and XP95A detector ranges.
- Single base that supports isolated Soteria UL and non-isolated XP95A detectors
- 8 bit address card for additional address support when used with Soteria UL detectors and CoreProtocol
- Designed to replace shallow and deep bases
- Easy-fit, easy to install and saving time
-
Out of Stock
APOLLO XP95A RELAY OUTPUT MODULE
Read moreThe XP95A Relay Output Module provides a single 2-pole changeover relay.
- Loop-powered
- Can be placed anywhere on loop
-
Out of Stock
APOLLO XPERT 7 BASE 4″
Read moreThe base is a low insertion force base with stainless steel contacts allowing easy and quick installation.
XPERT addressing
XPERT cards supplied with all bases
Locking feature to prevent unauthorized detector removal
Ideal for the XP95A detector range
-
Out of Stock
Apollo(Fire Alarm) AlarmSense Base Sounder Part No. 45681-510APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.
- 70d-87dB(A) sound output.
- Certified to EN54-3 by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder base combination (see Combination AlarmSense Devices section below).
-
C-TEC CFP 8 Zone Conventional Fire Alarm Panel – Certified to EN54 Standards
₦110,000.00 – ₦169,500.00Select options- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system) and optional CFP relay boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV fire detectors, sounders and visual alarm devices.
-
C-TEC CFP Standard 4 Zone Conventional Fire Alarm Panel Part No. CFP704-4
₦132,500.00Original price was: ₦132,500.00.₦129,500.00Current price is: ₦129,500.00.Add to cart- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB)
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry
- Manufactured by C-TEC in the UK
- Eight detector zone circuits
- Four conventional sounder circuits
- Integral 1.5A EN54-4/A2 compliant switch mode PSU
- Wide range of test and fault-finding facilities
- Four open-collector outputs (Fire, Fault, Remote and Reset)
- ‘Class change’ and alert inputs
- Installer-friendly design
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required
- Low 25mA quiescent current
- Multiple indicators
- No system expansion connections
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors
-
C-TEC CONVENTIONAL Fire Alarm ActiV Relay Base with Diode Part No. C4408DR
₦4,000.00Original price was: ₦4,000.00.₦3,000.00Current price is: ₦3,000.00.Add to cart-
- Compatible with C-TEC’s entire range of ActiV fire detectors.
- Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output.
- Ideal for switching CCTV, security and door retaining systems.
- Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.
- Easy to fit with lots of working space.
- Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.
- Integrated detector/base locking mechanism, head removal tool and ID tag.
- Simple ‘click and twist’ design.
- Remote LED terminals for the optional connection to a BF318 Remote indicator.
- C4408R non-diode relay base also available for use on systems that do not require head out monitoring.
-
-
C-TEC Fire Alarm ActiV Optical Smoke Detector Part No. C4416
₦27,500.00Original price was: ₦27,500.00.₦24,200.00Current price is: ₦24,200.00.Add to cart-
-
- DESCRIPTION
- A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.
- Manufactured by C-TEC in the UK.
- Third-party certified to EN54-5 by Intertek.
- Wide 6-33V DC operating voltage.
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
-
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Safe and Secured Payment
On all order over
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More