Category: Control panel

Showing all 14 results

wishlist

C-TEC CFP 8 Zone Conventional Fire Alarm Panel – Certified to EN54 Standards
₦110,000.00 – ₦169,500.00
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

Two on-board relays (Fire and Fault).

Two open-collector outputs (Remote and Reset).

‘Class change’ and alert inputs.

Installer-friendly design.

Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

Low 25mA quiescent current.

Multiple indicators.

System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system) and optional CFP relay boards.

Space for two x 12V 3.3Ah VRLA batteries.

Fully compatible with C-TEC’s ActiV fire detectors, sounders and visual alarm devices.
Select options
wishlist

C-TEC CFP Standard 4 Zone Conventional Fire Alarm Panel Part No. CFP704-4
₦129,500.00
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB)

Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry

Manufactured by C-TEC in the UK

Eight detector zone circuits

Four conventional sounder circuits

Integral 1.5A EN54-4/A2 compliant switch mode PSU

Wide range of test and fault-finding facilities

Four open-collector outputs (Fire, Fault, Remote and Reset)

‘Class change’ and alert inputs

Installer-friendly design

Attractive flush or surface mountable plastic lid and enclosure – no bezel required

Low 25mA quiescent current

Multiple indicators

No system expansion connections

Fully compatible with C-TEC’s ActiV range of conventional fire detectors
Add to cart
wishlist

C-TEC FP 2 Zone Conventional Fire Alarm Panel | Part Number: FF382-2
₦79,000.00
Installer-friendly design.

Robust metal enclosure with heavy-duty base connections.

One conventional Zone circuit

Two conventional Sounder circuits.

Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.

Non-latching class change sounder output, latching fire & non-latching fault outputs (via optional expansion loom).

Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).

Multi-lingual variants (subject to quantities).

Space for 2 x 12V 2.3Ah VRLA batteries.

Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.

Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
Add to cart
wishlist

C-TEC FP 4 Zone Conventional Fire Alarm Panel (expandable to 6 zones) Part No. FF384-2
₦80,000.00
Installer-friendly design.

Robust metal enclosure c/w lift off lid & heavy-duty base connections.

Four conventional Zone circuits (expandable to 6).

Two conventional Sounder circuits.

Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.

Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).

Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).

Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).

Multi-lingual variants (subject to quantities).

Space for 2 x 12V 3.2Ah VRLA batteries.

Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.

Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).

Download datasheet
Add to cart
wishlist

Gent 3271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)
₦366,000.00

Gent 13271-08LB 8 Zone Xenex Conventional Fire Alarm Repeat Panel EN54 (Less Batteries)

BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.

Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.

Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.

Add to cart
wishlist

Out of Stock
Gent Conventional Fire Alarm 2 Zone Xenex Panel
₦243,000.00

DESCRIPTION

Gent 13270-02LB 2 Zone Conventional Xenex Fire Panel

BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.

Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.

Read more
wishlist

Out of Stock
Gent Conventional Fire Alarm Xenex Spares Accessories Pack

The XENS-SPARE Gent Xenex Fire Alarm Panel spares pack is ideal for spare components for the Gent Xenex range of conventional fire alarm panels. This pack includes detection circuit end of line capacitors (including labels), sounder circuit resistors, a battery connection link, shorting link, mounting screws and fuses (250V 500mA, T3.15AL, F5AL)

Read more
wishlist

Gent Fire Alarm Vigilon Main Control Card EN54 Zonal Display VIG-MCC-EN
₦934,000.00

Gent VIG-MCC-EN Vigilon Main Control Card EN54 Zonal Display

The Gent VIG-MCC-EN is a replacement main control card EN54 zonal display for use with the Gent Vigilon panel.

Add to cart
wishlist

Gent Fire Alarm 13270-04LB 4 Zone Conventional Xenex Fire Panel
₦279,000.00

DESCRIPTION

Gent 13270-04LB 4 Zone Conventional Xenex Fire Panel

BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.

Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.

Add to cart
wishlist

Gent Fire Alarm 13270-08LB 8 Zone Conventional Xenex Fire Panel
₦499,500.00

Gent 13270-08LB 8 Zone Conventional Xenex Fire Panel

BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.

Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.

Utilising LPCB approved conventional smoke or heat detectors, Xenex offers exceptional value for money.

Add to cart
wishlist

Out of Stock
QP112 1 zone Fire Alarm Conventional Control Panel
₦0.00
Removable front board for easy maintenance.

Easy-to-clean front board is able to avoid dirt attached.

High luminance and long life span LED.

Independent visual & audible indication for zone open/short fault.

Independent visual & audible indication for AC power & battery fault.

Visual & audible indication for sounder short circuit fault.

Buzzer silence with 3-mode operation feature.

Accurate supervision circuit for battery.

Short circuit = Alarm feature ( selected by JUMPER applicable for manual call point w/o resistance).
Read more
wishlist

Out of Stock
QP212 2 zone Fire Alarm Conventional Control Panel
₦0.00
Day/Night Mode Selection.

Ground fault detection feature.

Zone Output, Fault Output and Alarm Output (NO. NC. COM).

System will back to normal automatically after alarm status is released.

Removable front board for easy maintenance.

Easy-to-clean front board is able to avoid dirt attached.

High luminance and long life span LED.

Independent visual & audible indication for zone open/short fault.

Independent visual & audible indication for AC power & battery fault.

Visual & audible indication for sounder short circuit fault.

Buzzer silence with 3-mode operation feature.

Accurate supervision circuit for battery.
Read more
wishlist

Out of Stock
QP412 4 Fire Alarm zone Conventional Control Panel
₦0.00
Day/Night Mode Selection.

Ground fault detection feature.

24V DC power output for external load.

Zone EOL resistor can be set from panel board.

Zone Output, Fault Output and Alarm Output (NO. NC. COM).

System will back to normal automatically after alarm status is released.

Removable front board for easy maintenance.

Easy-to-clean front board is able to avoid dirt attached.

High luminance and long life span LED.

Independent visual & audible indication for zone open/short fault.

Independent visual & audible indication for AC power & battery fault.

Visual & audible indication for sounder short circuit fault.

Buzzer silence with 3-mode operation feature.

Accurate supervision circuit for battery.
Read more
wishlist

Zeta Infinity 8 Conventional Fire Alarm Panel – Enhanced Safety
₦167,000.00 – ₦247,000.00

Access via password – removes the problem of lost keys
One-man test facility
Disablement facility for zones & sounders
Space for up to 3Ah batteries
Sounder delay option
4 sounder circuits (IN4, IN6 & IN8)
Sounder circuits 3 and/or 4 can be configured as Aux 24V supplies
Meets all requirements of latest EN54 part 2 and part4

Select options

No items found.