Popular
-
Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
-
Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
-
Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦5,455,000.00
-
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦18,500.00
Category: Addressable fire alarm
Addressable fire alarm system works by having every detection and notification device connected to each other and to control panel. In contrast to a conventional fire alarm system, which uses electrical currents, addressable system sends digital signals in binary code. Addressable systems function similarly to computers, converting voltage variations to binary code, consists of various combinations of zeros and ones. This enables the addressable fire alarms system to then send critical information to a control panel with a broader range of data. An addressable system can also pinpoint the precise location of smoke or fire, increasing safety and also reliability.
Showing 1–16 of 245 results
-
Out of StockAdvanced 2 in 1 Gas Detector (Fire Alarm System) – Protect Your Home & Workplace
Read more- Human voice prompt.
- High reliable catalytic combustion method.
- Gas concentration displaying(PPM).
- Power supply from AC 90V-240V or 9V rechargeable battery (Not included).
- Intelligent microprocessor control.
- Auto low battery warning.
- Alarm memory function.
- Auto detect sensor failure.
-
Out of StockAH (Fire Alarm)-03127-S Electronic Sounder
Read moreGeneral This electronic sounder is designed for use with fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides and audio-visual warning with is suitable for places where high sound output and visual indication is required. Characteristics EN54-3 Approval Type B Sounder 32 signal tones selectable by Dip switch. High …
-
AH-0014(Fire Alarm)Flame Detector
₦111,000.00Add to cartGeneral Description The detector has wide-angle sensitivity that can reliably and quickly detect weak ultraviolet radiations emitted by flame. It will not react to room illuminations, infrared or other light sources unrelated to real fire. Applications Premises with higher ceilings: theater, gym, storage, gallery or warehouse, etc. Places where fires happen easily: places storing with combustible goods, gas …
-
Out of StockAH-03127-BS Electronic Sounder and Beacon
Read moreGeneral This electronic sounder is designed for use with fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides and audio-visual warning with is suitable for places where high sound output and visual indication is required. Characteristics EN54-3 Approval Type B Sonder Beacon 32 signal tones selectable by Dip switch. …
-
Out of StockAH-0315 (Fire Alarm) Multi-Purpose Smoke and Heat Detector
Read more- Special chamber design has greatly decreased dust levels and improved detection accuracy.
- Dual LEDs for 360-degree visibility.
- Advanced technology enables this detector to increase its precision in fire detection, improve signals to avoid noise interference and thus reduce unwanted false alarm.
- Low current consumption that allows more detectors to be used with each control panel.
- Dual contacts on the base which enhance the connecting stability between sensor and base.
- All bases are fitted with a shorting spring to permit maintenance without disconnecting when removing the detector head
-
Out of StockAH-03233 (Fire Alarm) Releasing Indicator
Read moreCharacteristics The display can be set according to customer’s requirements. Model AH-03233 Supply Voltage 24V DC 670mA (bulb) 310mA (LED) Light Source 1W bulb x 18 or ø5 LED RED x 28 Display Type Non-flash Material 0.8mm stainless steel Color Red Dimensions 155mm(H) x 405mm(W) x 60mm(D)
-
Out of StockAHR-871 (Fire Alarm) Mechanical Rate of Rise Heat Detector
Read moreSpecification AHR-871 Mechanical Rate of Rise Heat Detector Model AHR-871 Type 2 wire 3 wire 4 wire Alarm Contact N/A N/A 0.8A @30V DC, 0.4A @125V AC Voltage Range 12 ~ 30V DC Alarm Current @24V DC 470Ω 40mA 40mA 35mA Alarm Temperature Comply to EN54 Ambient Temperature -10℃ ~ +55℃ Material Fire-proof plastic Dimensions 111mm(Dia.) …
AHR-871 (Fire Alarm) Mechanical Rate of Rise Heat DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO
Read more- Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.
- 70d-87dB(A) sound output (visual indicator activates with sounder).
- Certified to EN54-3 by UL International (UK) Limited.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- AlarmSense priority/non priority signal recognition
- Detects the removal of a detector head and reports a fault
- Continues to work during unauthorised removal of detector.
- High and low volume ranges.
- Red and white caps available for stand-alone use.
- Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
-
Apollo (Fire Alarm) AlarmSense High Temperature Heat Detector
₦14,000.00Add to cartAlarmSense High Temperature Heat Detector Part No. 55000-193APO A high quality Type CS static high temperature heat detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-5 by UL International (UK) …
Apollo (Fire Alarm) AlarmSense High Temperature Heat DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Integrating Optical Smoke Detector
Read moreAlarmSense Integrating Optical Smoke Detector Part No. 55000-391APO An integrating optical smoke detector. Responds well to slow-burning, smouldering fires. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International …
Apollo (Fire Alarm) AlarmSense Integrating Optical Smoke DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Open Area Sounder IP65
₦49,500.00Read moreAlarmSense Open Area Sounder IP65 Part No. 55000-018APO A powerful wall-mounting open-area Sounder suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. IP65 rated. Up to 99dB(A) sound output at 1m. Device locking facility. Max. five Open-Area Alarm Devices per AlarmSense zone. Supply wiring 2-wire monitored, polarity insensitive. Supply/operating voltage 18-33VDC …
Apollo (Fire Alarm) AlarmSense Open Area Sounder IP65Read More
-
Out of StockApollo (Fire Alarm) AlarmSense Open Area Sounder/Visual Indicator
Read moreAlarmSense Open Area Sounder/Visual Indicator Part No. 55000-017APO A powerful wall-mounting open-area Sounder/Visual Indicator suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. IP65 rated. Up to 99dB(A) sound output at 1m. Ultra-bright red LED. Device locking facility. Max. five Open-Area Alarm Devices per AlarmSense zone. Download datasheet Flash rate & …
Apollo (Fire Alarm) AlarmSense Open Area Sounder/Visual IndicatorRead More
-
Apollo (Fire Alarm) AlarmSense Optical Smoke Detector
₦14,000.00Add to cartAlarmSense Optical Smoke Detector Part No. 55000-390APO A high quality optical detector. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Housed in a pure white polycarbonate moulding. Fitted with two alarm LEDs to allow 360º visibility. Third-party certified to EN54-7 by UL International (UK) Limited. 9-33V DC operating voltage. Requires …
Apollo (Fire Alarm) AlarmSense Optical Smoke DetectorRead More
-
Out of StockApollo (Fire Alarm) AlarmSense Relay Module Part No. 55000-835APO
Read moreAllows devices such as vibrating pillow alarms or vibrating radio/paging devices to be connected to an AlarmSense system. Can also be used to monitor and switch conventional sounders and visual indicators. Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. Operates in three configurations:- (1) relay activation places the AlarmSense Zone voltage …
Apollo (Fire Alarm) AlarmSense Relay Module Part No. 55000-835APORead More
-
Out of StockAPOLLO Addressaable Fire Alarm AV Control Module XP95A
Read moreThe XP95A AV Control Module monitors and controls the operation of a zone of conventional sounders and reports their status to the control panel.
- Allows sounders to be operated continuously or be pulsed, 1 second on, 1 second off
- May be synchronized when in pulsed operation
- Can also be used for public address speakers
-
APOLLO Addressable Fire Alarm INPUT SWITCH MONITOR MODULE SA4700-102APO
₦45,000.00Add to cartThe Dual Input Monitor Module Is a loop-powered device incorporating a dual monitored input circuit for connection to remote switches.
- Built-in isolator
- Tri-coloured LEDs status reporting
- Ground fault detection
- Easy to install
- Interrupt facility
- Selectable priority of inputs
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
