AlarmSense High Temperature Heat Detector
Roll over image to zoom in
- Suitable for use with C-TEC's CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
AlarmSense High Temperature Heat Detector
55000-193APO
- A high quality Type CS static high temperature heat detector.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
| Approvals/certifications | Certified to EN54-5 by UL International (UK) Limited. |
| Application/operation | Generates an alarm condition when it detects a temperature of between 84ºC & 100ºC. |
| Application temperature | 55°C typical, 80°C max. |
| Static response temperature | 84°C min, 100°C max. |
| Supply wiring | 2-wire monitored, polarity insensitive. |
| Supply/operating voltage | 9 to 33V DC. |
| Quiescent current | 50µA @ 15 VDC. |
| Alarm voltage | 9-33V DC. |
| Alarm current | 1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V. |
| Alarm reset voltage | 2V max (1 second alarm reset time). |
| Product dimensions (mm) | 100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base). |
| Construction & finish | White polycarbonate. |
| IP Rating | TBC. |
| Weight | 100g. |
Additional information
| Dimensions | 10.0 × 4.0 cm |
|---|
Reviews
There are no reviews yet.