- Burglary Alarm System
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Fire Alarm System
- Addressable fire alarm
- Apiration Systems
- Conventional Fire Alarm
- Fire Suppression system
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
- Access Control Accessories
- Door access control
- Gates Access control
- Time and Attendance systems
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
Category: Fire Suppression system
Showing all 5 results
C-TEC Fire Alarm Automatic 3+1 Extinguisher Panel Part No. EP203
₦330,000.00Add to cart
Approvals/certifications Certified to EN12094-1 and EN54-2 & 4 by the LPCB.
Mains supply 230V 50/60Hz.
Mains rated current 810mA max.
Internal power supply 19V-28.5V (27V nominal). Ripple 7V maximum (battery fault).
Total output current limited to 1.5A @ 230Vac continuous, 3A peak (ImaxA eq 800mA).
Quiescent current 40mA (on mains fail). Zone quiescent 2mA max.
Max battery size and type 2 x 12V 7Ah VRLA connected in series.
No. of detector zone circuits 3 @ 19-28Vdc (Max. length per circuit is 250m).
Max. devices per detector zone 20 detectors (or 32 detectors/manual call points combined).
No. of conventional sounder circuits 3 (two x 1st stage; one x 2nd stage). Max. length per circuit is 50m).
EOL resistor value 6800 5% Tol. 0/25W (blue, grey, red, gold).
Max. sounder output current 3 x 200mA.
Auxiliary relays Six: (1) Fire; (2) Local Fire; (3) Extract Fan; (4) 1st Stage; (5) 2nd Stage; (6) Fault. Volt free single pole
changeover. Max. switch current 1A; Max. switch voltage 30Vdc. Five additional relays available via
EP212 relay card.
Other outputs Extinguishant release (21-28Vdc, rated at 1A for 5 mins). Programmable to delay by 0-60 seconds; to
be active for 1-300 seconds and to flood for 60-1800 seconds.
Auxiliary inputs Six: (1) Manual Release; (2) Flow Switch; (3) Low Pressure; (4) Mode; (5) Hold; (6) Abort. 8K-2K normal;
1.8K-200 active; 150-0 short circuit. EOL value: 6K8 +/-5%, 0.25W.
Indicators Multiple indicators are provided – refer to the EP203 instructions for details.
Controls Extinguishant release (housed in yellow casing); Accessed keyswitch; Operation keyswitch (Manual
only or Manual & Auto); Buttons for Menu; Silence internal sounder; reset panel; silence/resound
sounders and scrolling.
Expansion connections Yes – for up to 8 x Remote status units (2 wire RS485 + 2 wire power) and/or up to 8 x Ecomomy
status units (2 wire power + 2 wire mode select).
Product dimensions (mm) 439 W x 276 H x 70 D mm (back box); 467 W x 293 H x 29 D mm (lid).
Construction & finish Metal back box; metal chassis’ plastic lid.
IP Rating IP30.
Weight 4.2kg (without batteries).
Operating conditions/temperature -5°C to +40°C. Max relative humidity: 95%
Out of Stock
QSP-120 Multi-Hazard Suppression Control PanelRead more
QSP-120 Multi-Hazard Suppression Control Panel Characteristics Panel and manual pull station count-down simultaneously. Discharge delay timer setting (20~999 seconds). Cross-zone detection confirmation makes better stability. Built-in phone jacks on both panel and manual pull station. Expandable to 5 loops (10 zones) detection sections. Each section has manual/auto operation mode. Wiring trouble inspection. Through dipswitch …
Out of Stock
QSP-32 Fire Alarm Manual Pull Station₦0.00Read more
Characteristics Emergency Start/Stop switch, Auto/Manual key switch. Power LED, Releasing LED, Start LED, Stop LED, Auto LED, and Manual LED. Digital release countdown. Specifications Model QSP-32 Supply Voltage 24V DC Material 1.2mm stainless steel Color Red Dimensions 160mm(H) x 165mm(W) x 50mm(D) Catalogue QSP-32 Catalogue
Zeta EX-PRO Premier Fire Extinguishing Control Panel
₦355,000.00Add to cart
The EX Pro is the latest modern designed extinguishing panel from Zeta Alarm Systems, fully complying with EN54 parts 2 & 4, and EN 12094 part 1. Featuring a blue 4 x 20 LCD display with a list of extra features such as memory log of fire, fault and system events, adjustable flood times and …
ZETA Premier EX Pro Fire Alarm Output Expansion Relay PCB | EX-OER8Read more
Premier EX Pro Output Expansion Relay PCBs The EX-OER output expansion relay board can be mounted inside the EX Pro to provide voltage-free changeover relay contacts for reset, mode, discharged, abort and additional 1st stage, 2nd stage output and extract fan output. One unit can be used. Model Number Description Datasheets & Manuals EX-OER8 Premier …
Join Risk Free
30 days refund
Online 24 hours
Safe and Secured Payment
On all order over
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in NigeriaRead More