Category: replacement accessories

Showing 1–16 of 84 results

• 

  wishlist

  Out of Stock

  Apollo Addressable Fire Alarm E-Z Fit Base – 6″ Ultra-Low Profile Detector Mount

  • Four-wire base
  • Detector locking mechanism
  • One way fit
  • Easy to wire
  • Contains a ground wire terminal

  Read more
• 

  wishlist

  Out of Stock

  APOLLO ADDRESSABLE FIRE ALARM ISOLATOR – NEGATIVE 55000-720APO

  ₦0.00

  The Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short-circuit is removed, the isolators automatically restore power and data to the isolated section

  • Detects wiring short-circuits
  • Minimises disruption from short-circuits
  • Automatic de-isolation on the short-circuit removal

  Read more
• 

  wishlist

  Out of Stock

  Apollo Addressable Fire Alarm Series 65A Base – High-Performance Detector Mounting Solution

  Two-wire base
  • Detector locking mechanism
  • One-way fit
  • Easy to wire
  • Contains a ground wire terminal
  • Contains no electric parts

  Read more
• 

  wishlist

  Out of Stock

  Apollo Addressable Fire Alarm Series 65A Relay Bases – Reliable Control for Fire Safety Systems

  The Series 65A Relay Bases are intended for indoor use only with control units using four-wire detector supply and alarm initiating circuits.
  • Four-wire base
  • Detector locking mechanism
  • One-way fit
  • Easy to wire
  • Contains a ground wire terminal

  Read more
• 

  wishlist

  APOLLO ADDRESSABLE FIRE ALARM XPERT 7 BASE 45681-210APO

  ₦4,500.00 ₦3,700.00

  The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation.

  • XPERT addressing
  • XPERT cards supplied with all bases
  • Locking feature to prevent unauthorised detector removal
  • Ideal for the XP95 and Discovery detector ranges

  Add to cart
• 

  wishlist

  C-TEC CONVENTIONAL Fire Alarm ActiV Relay Base with Diode Part No. C4408DR

  ₦4,000.00 ₦3,000.00

  • • Compatible with C-TEC’s entire range of ActiV fire detectors.
    • Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output.
    • Ideal for switching CCTV, security and door retaining systems.
    • Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.
    • Easy to fit with lots of working space.
    • Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.
    • Integrated detector/base locking mechanism, head removal tool and ID tag.
    • Simple ‘click and twist’ design.
    • Remote LED terminals for the optional connection to a BF318 Remote indicator.
    • C4408R non-diode relay base also available for use on systems that do not require head out monitoring.

    Download datasheet

  Add to cart
• 

  wishlist

  C-TEC Fire Alarm Remote Status Unit, Surface Part No. EP210S

  ₦175,000.00 ₦171,000.00

  • • • • DESCRIPTION
        • Designed to connect to the RS485 terminals on an EP203 Automatic Extinguisher Panel to provide remote system status indication via a 128 x 64 pixel LCD status display.
        • Also includes a pull-down manual release button, a mode (auto/manual) keyswitch and a wide range of system status indicators.
        • Three monitored input connections (Hold, Abort and Mode).
        • Max. 8 remote status units per EP203 panel.
        • Surface remote status units (EP210S) and weather proof enclosures (BF359/1) also available.
        • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC Fire Alarm ActiV Non-Diode Base Part No. C4408

  ₦5,500.00 ₦4,500.00

  • Compatible with C-TEC’s entire range of ActiV fire detectors.
  • Ideal for use in some non-UK territories where head-out monitoring is not required.
  • Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.
  • Easy to fit with lots of working space.
  • Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.
  • Integrated detector/base locking mechanism, head removal tool and ID tag.
  • Simple ‘click and twist’ design.
  • Remote LED terminals for the optional connection to a BF318 Remote indicator.
  • C4408D diode and C4408R relay bases also available.

  • Download datasheet

  Add to cart
• 

  wishlist

  C-TEC Fire Alarm CONVENTIONAL ActiV Diode Base Part No. C4408D

  ₦4,500.00 ₦3,000.00

  • • Compatible with C-TEC’s entire range of ActiV fire detectors.
    • Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.
    • Easy to fit with lots of working space.
    • Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.
    • Integrated detector/base locking mechanism, head removal tool and ID tag.
    • Simple ‘click and twist’ design.
    • Remote LED terminals for the optional connection to a BF318 Remote indicator.
    • C4408 non-diode and C4408R relay bases also available.

  Add to cart
• 

  wishlist

  Out of Stock

  C-TEC Fire Alarm IP66 Rated Enclosure for EVC302GF or EVC302F Outstations Part No. BF359/1

  ₦0.00

  • • An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.
    • Includes a handle and mounting plate.
    • Measures 200 W x 302 H x 123mm deep.
    • Textured RAL 7035 (light grey) finish.
    • Also compatible with C-TEC’s EP210F remote status units.

  Read more
• 

  wishlist

  Out of Stock

  CFP Relay Output Card (2 Output Per Zone Relays)

  CFP Relay Output Card (2 Output Per Zone Relays) Part No. CFP766 An optional system expansion device for use with CFP702-4 Standard 2 Zone Fire Panels or CFP702-2 AlarmSense 2 Zone Fire Panels. Provides two output per zone relays which will changeover when the corresponding zone is in alarm (subject to certain conditions – for full details refer to …

  CFP Relay Output Card (2 Output Per Zone Relays)Read More

  Read more
• 

  wishlist

  CTECH Economy REMOTE Status Unit FOR EXTINGUISHER Part No. EP211

  ₦95,000.00 ₦85,000.00

  • • • Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.
      • Includes a mode (auto/manual) keyswitch.
      • Mounts on a standard UK single gang 25mm flush or surface back box.
      • Max. 8 economy status units per EP203 panel.
      • Download datasheet

  Add to cart
• 

  wishlist

  Out of Stock

  Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface Technology

  Upgrade your fire safety system with the Gent Vigilon Single Channel Mains Switching Interface with Enclosure – S4-34401. Engineered for seamless integration with the Vigilon system, this interface unit delivers heavy-duty relay switching for both 24V and 230V applications. Dive into the details of this cutting-edge product designed to elevate your building controls and damper …

  Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface TechnologyRead More

  Read more
• 

  wishlist

  Out of Stock

  Gent Fire Alarm Spare Key for Vigilon, Compact and SenTRI Panel Door (Singular) VS-KEY-S

  DESCRIPTION

  Gent VS-KEY-S Spare Key for Vigilon, Compact and SenTRI Panel Door (Singular)

  The VS-KEY-S is a spare or replacement key which has been designed for use on the Gent Vigilon and Compact doors.

  The VS-KEY-S also be used with the doors on the SenTRI 2 and SenTRI 4 fire alarm control panels from the SMS range.

  Read more
• 

  wishlist

  Out of Stock

  Gent 4 Channel Interface Channel Module- S4-34450

  Description
  Vigilon’s range of loop powered interfaces offer
  a comprehensive range of connectivity options
  with critical plant and other safety systems
  Vigilon can accommodate a high quantity of loop powered interface units
  offering fexible range of inputs and outputs from the FD&A system from
  plant control and signalling other systems in a fi re, to linking with other
  emergency management systems such as sprinklers or security systems.

  Read more
• 

  wishlist

  Gent Addressable Fire Alarm Terminal Node for Vigilon Panel Networks COMPACT-NODE

  ₦3,200,000.00 ₦3,093,000.00

  DESCRIPTION

  Gent COMPACT-NODE Compact Plus Terminal Node for Vigilon Panel Networks

  The Gent Compact Plus Terminal Node is designed for use with Vigilon Panel Networks.

  Key Features

  • Supplied in the colour Black
  • Designed for use with Vigilon panel networks

  Add to cart