Category
- Burglary Alarm System
- Cable
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
- Promotions
Popular
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦6,250,000.00Original price was: ₦6,250,000.00.₦6,170,000.00Current price is: ₦6,170,000.00. -
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦22,000.00Original price was: ₦22,000.00.₦18,500.00Current price is: ₦18,500.00. -
PAXTON ACCESS CONTROL NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET
₦462,000.00Original price was: ₦462,000.00.₦458,000.00Current price is: ₦458,000.00. -
Concept Handheld Metal Detector with Vibration Function
₦20,000.00Original price was: ₦20,000.00.₦19,000.00Current price is: ₦19,000.00. -
Fisher Research Labs M-scope Walk-Through Metal Detector
₦4,600,000.00Original price was: ₦4,600,000.00.₦4,500,000.00Current price is: ₦4,500,000.00. -
CONCEPT (Burglar Alarm) WIRELESS SIGNAL REPEATER
₦23,500.00Original price was: ₦23,500.00.₦21,500.00Current price is: ₦21,500.00. -
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00Original price was: ₦13,000.00.₦11,000.00Current price is: ₦11,000.00.
AlarmSense Standard Rate of Rise Heat Detector
55000-190APO
- A high quality Type A1R rate of rise heat detector.
- Suitable for use with C-TEC’s CFP AlarmSenSe range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-5 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
Approvals/certifications | Certified to EN54-5 by UL International (UK) Limited. |
Application/operation | Generates an alarm condition when it detects a temperature of between 84ºC & 100ºC. |
Application temperature | 55°C typical, 80°C max. |
Static response temperature | 84°C min, 100°C max. |
Supply wiring | 2-wire monitored, polarity insensitive. |
Supply/operating voltage | 9 to 33V DC. |
Quiescent current | 50µA @ 15 VDC. |
Alarm voltage | 9-33V DC. |
Alarm current | 1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V. |
Alarm reset voltage | 2V max (1 second alarm reset time). |
Product dimensions (mm) | 100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base). |
Construction & finish | White polycarbonate. |
IP Rating | TBC. |
Weight | 100g. |
Detector
55000-391APO
- An integrating optical smoke detector.
- Responds well to slow-burning, smouldering fires.
- Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.
- Housed in a pure white polycarbonate moulding.
- Fitted with two alarm LEDs to allow 360º visibility.
- Third-party certified to EN54-7 by UL International (UK) Limited.
- 9-33V DC operating voltage.
- Requires a 45681-244APO AlarmSense base.
- Can also be purchased as part of a detector/sounder or detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).
Approvals/certifications | Certified to EN54-7 by UL International (UK) Limited. |
Application/operation | Generates an alarm condition when it detects a pre-set threshold of smoke penetration into the smoke chamber. |
Supply wiring | 2-wire monitored, polarity insensitive. |
Supply/operating voltage | 9 to 33V DC. |
Quiescent current | 50µA @ 15 VDC. |
Alarm voltage | 9-33V DC. |
Alarm current | 1.5mA @ 2-8.5V; 25 +/- 2mA @ 10.5-15V; 1.5AmA @ 18-24V; 2mA @ 33V. |
Alarm reset voltage | 2V max (1 second alarm reset time). |
Product dimensions (mm) | 100mm diameter x 42m deep (detector only); 100mm diameter x 50mm deep (detector in base). |
Construction & finish | White polycarbonate. |
IP Rating | TBC. |
Weight | 100g. |
Related products
-
Automated Gate Safe Infrared Detector | IP55 waterproof | DC/AC 12-24V safety sensor (Burglar Alarm System)
Read more- Install each pair at the opposite positions.Then there is an infrared area between these two detector parts.
- When someone passes the infrared region, the detector will send alarm signal to the security alarm host (which not included here).
- Install Distance(Max.)in the above chart means the maximum install distance between the two detector parts.
- Great to be installed for security system in school, office building, hosipital, home yard, etc.
- Detecting range can be reduced to 30% in bad weather conditions, like rain, dust, etc.
-
Nexus Sounder (AC)PNS-0018 | Security Alarm System
Read moreThis high output sounder is designed for industrial applications.
Connections are made to the base during the initial wiring
phase which results in faster and more reliable installation.
In addition, the head is fixed by quarter turn fasteners avoiding the need to screw up four individual screws thus enabling faster installation and accurate seal compression for weatherproofing.
IP66 as standard means that Nexus can be installed in
almost any location. -
Flashguard Xenon Beacons Security Alarm System QBS-0002
₦6,000.00Original price was: ₦6,000.00.₦5,000.00Current price is: ₦5,000.00.Add to cartFlashguard weatherproof xenon beacons are ideal visual
indicators in a variety of applications.
All Flashguard beacons are fitted with a diffuser for
greater visibility and spread of light. Two styles are
available, Standard and Ultra Low Profile.
Standard: includes a terminal block and a 27mm deep
base supplied with a seal and grommet.
Ultra Low Profile: comes complete with a screw and nylon
wing nut and is supplied with mounting gasket and 40cm
of cable.
A weatherproof cable connector is available to upgrade
the product from IP65 rating to IP67. -
Klaxon EXD Buzzer TCA-0005 Burglar Alarm System
Read moreEXD Buzzer
The Exd Buzzer is an explosion proof buzzer designed
for use in hazardous areas where a distinctive signal is
required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
use in Zone 1 and Zone 2 areas.
Producing a tone with low frequency, it cuts through
background noise more effectively than many other
devices of a similar output.
Mounted in a rugged reinforced polyester case and
weatherproof to IP66, it is suitable for use in the most
arduous conditions.
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Safe and Secured Payment
On all order over
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.