Category: Addressable fire alarm

Showing 161–176 of 244 results

wishlist

Gent Fire Alarm Watt Mains Powered Distributed Amplifier COMPACT-MAINS-DAU 60

Gent COMPACT-MAINS-DAU 60 Watt Mains Powered Distributed Amplifier The Mains Powered DAU is a new addition to Compact Voice increasing the design capability and flexibility of the system. The new Amplifier Unit allows connection to a comprehensive range of standard 100 volt loudspeakers meeting the needs of any VA application at the same time as maintaining …

Gent Fire Alarm Watt Mains Powered Distributed Amplifier COMPACT-MAINS-DAU 60Read More

Read more
Sale!

wishlist

Gent Mains Powered 4 Channel Interface – S4-34440-02
Original price was: ₦1,200,000.00.Current price is: ₦1,150,000.00.

Gent Mains Powered 4 Channel Interface – S4-34440-02 The S4 Mains powered interface units (Part No’s: S4-34440-02 and S4-34440-12) are EN54-4 compliant battery backed power supplies that can be directly connected to the Vigilon and Nano loop and also have highly flexible interfacing capability. The 4 channels can be individually configured to provide Output and …

Gent Mains Powered 4 Channel Interface – S4-34440-02Read More

Add to cart
Sale!

wishlist

Gent Manual Call Point with Protective Cover & Resettable Element | Fire Alarm System
Original price was: ₦52,000.00.Current price is: ₦49,000.00.

Gent S4-34845 Manual Call Point with Protective Cover & Resettable Element

The S4-34845 is a Addressable Manual Call Point (MCP) from the Gent range. The S4-34845 has an response time of less than 1 second. The S4-34845 Manual Call Point comes with a protective cover and also comes with the resettable element, which can be done at any given time using a Call Point Test Key seen in the related products.

Add to cart
wishlist

Gent Nano Addressable Fire Alarm 24 – Single LoopControl Panel
₦0.00
Gent Nano 24

127 devices per loop

Two conventional sounder outputs.

Fire & fault relay on board
Read more
Sale!

wishlist

Gent S3 Red Body Sounder High Power
Original price was: ₦55,000.00.Current price is: ₦52,000.00.

Gent S3 Red Body Sounder High Power with Red VAD – S3-S-VAD-HPR-R
S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms. Combined with flexible configuration from the Gent by Honeywell fire control panels, this loop powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation. Very low power consumption means that the Vigilon system offers more high performance sounders and VADs on the loop than any other manufacturer

Add to cart
wishlist

GENT S3-SN-ST-WR 2 way Sounder/Strobe White Body Red Lens
₦0.00

Honeywells Sounder Beacon, designed and approved to meet both EN54-3 and EN54-23, is ideal for applications where a dual purpose audible and visual alarm device is required. A new folded horn design, high output LEDs, advanced optics and an innovative lens design, provides outstanding sound output and omni-directional light coverage at low current draw

Read more
Sale!

wishlist

Gent Vigilon Plus Addressable Fire Alarm Terminal Node for Multiple IO Cards and Fibre Networks
Original price was: ₦3,200,000.00.Current price is: ₦3,107,000.00.
DESCRIPTION

Gent VIGPLUS-NODE Vigilon Plus Terminal Node for Multiple IO Cards and Fibre Networks

The Vigilon Plus Terminal Node (EN54) is designed for use with multiple IO cards and Fibre networks.

Key Features

Supplied in the colour Black

Designed for use with multiple IO cards and fibre networks

EN54 Version
Add to cart
Sale!

wishlist

Gent Vigilon Plus Fire Alarm Addressable Repeater Control Panel with Batteries
Original price was: ₦1,350,000.00.Current price is: ₦1,225,000.00.

Description

Gent Vigilon Plus Repeater Panel with Batteries

The Vigilon Plus Repeat control panel provides full display and control of the system. Connecting to the detection loop, the repeat panel provides a cost-effective solution with minimum requirements for cabling and installation. Repeat panels are supplied complete with their own 72-hour power supply and standby batteries.

The feature-packed Vigilon analogue addressable fire detection and alarm system from Honeywell Gent offers medium to large sized building owners the latest in system flexibility and control panel aesthetics. Vigilon offers a degree of system sophistication that has not previously been available and incorporates a host of features designed to make it the simplest system to install, configure and use.

As well as providing the user with clear comprehensive information in the event of a fire, Vigilon additionally provides an entire historic log of the system’s management information. Should a system fault occur a detailed explanation is shown and the user can at any time navigate through the faults history.

Add to cart
wishlist

Gent VS-BATTBOX Battery Box for Vigilon Fire Alarm Panel (Excludes Batteries)

Gent VS-BATTBOX Battery Box for Vigilon Panel (Excludes Batteries)

The VS-BATTBOX is a Battery Box for Vigilon Panel (excludes batteries).

Read more
Sale!

wishlist

Gents Fire Alarm Loop Powered Interfaces(S4-34440-02)
Original price was: ₦674,000.00.Current price is: ₦655,000.00.

DESCRIPTION

Interfaces are used to link the
fire alarm system to other plant
management devices such as
sprinklers and security systems.
They can also be used to link to a
zone of conventional detectors.
The Vigilon system can
accommodate a high capacity of
single channel interfaces on the
loop operating both inputs and
outputs.
The loop powered four channel
interface range has individually
sectored outputs with channel
1 set as a loop powered zone
module.
All interfaces are seen by the
panel as one address although
each input/output can have a
separate label displayed at the
panel.
Interfaces are either powered
from the loop or require a
separate mains supply. The
mains power version has its own
battery backup.

Read more
wishlist

Gents Fire Alarm Loop Powered Interfaces(S4-34490)

Description
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.

Read more
wishlist

GentS Fire Alarm Quad Optical Heat Detector S4-710

Gent S4-710 S-Quad Optical Heat Detector

The S4-710 is specifically designed to be used with the Gent Vigilon range of Analogue Addressable Control Panels. This detector is an Optical Type Analogue Addressable Smoke Detector combined with a Heat Detection Element. It requires a Gent S4-700 base for mounting.

Read more
wishlist

Gents Fire Alarm Sounder Beacons EN54-23 Approved VADs

Honeywell’s Non-Addressable Sounder Beacon is ideal for applications where a dual purpose audible and visual alarm device is required. The product features a new folded horn design, high output LEDs, advanced optics and an innovative lens design, providing outstanding sound output and omni-directional light coverage at low current draw. Specifically designed and approved to meet …

Gents Fire Alarm Sounder Beacons EN54-23 Approved VADsRead More

Read more
wishlist

INTELLIGENT MANUAL CALL POINT – GREEN SA5900-906APO
The Manual Call Point is commonly used to manually release secure doors or barriers in the event of emergency.

Resettable operating element

170° viewable LED

Suitable for semi flush or surface mounting

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95, Discovery and CoreProtocol compatible
Read more
wishlist

INTELLIGENT MANUAL CALL POINT – ORANGE SA5900-907APO
The Manual Call Point is commonly used to manually control smoke vent systems.

Resettable operating element

170° viewable LED

Suitable for semi flush or surface mounting

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95, Discovery and CoreProtocol compatible
Read more
wishlist

INTELLIGENT MANUAL CALL POINT – WHITE SA5900-903APO
The Manual Call Point is commonly used to manually initiate a hazard alert.

Resettable operating element

170° viewable LED

Suitable for semi flush or surface mounting

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95, Discovery and CoreProtocol compatible
Read more

No items found.