Category: Fire Alarm System

Showing 65–80 of 460 results

wishlist

Out of Stock
APOLLO Addressable Fire Alarm XPERT 7 BASE 4″ – ISOLATING
The base senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits.

Detects wiring short-circuits

High brightness LED

Up to 20 detectors or their equivalent load, may be installed between isolating bases
Read more
wishlist

APOLLO ADDRESSABLE FIRE ALARM XPERT 7 BASE 45681-210APO
Original price was: ₦4,500.00.Current price is: ₦3,700.00.
The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation.

XPERT addressing

XPERT cards supplied with all bases

Locking feature to prevent unauthorised detector removal

Ideal for the XP95 and Discovery detector ranges
Add to cart
wishlist

Out of Stock
APOLLO Addressable Fire Alarm XPERT 7 BASE 6″
All detectors in the XP95A product line fit the XP95A Mounting Base which is a low insertion force base with stainless steel contacts for the detector terminals. XPERT Cards are supplied with all bases.

XPERT addressing

One-way fit

Locking feature to prevent unauthorised removal
Read more
wishlist

Out of Stock
APOLLO Addressable Fire DIN-RAIL MINI SWITCH MONITOR MODULE XP95A
The XP95A DIN-Rail Mini Switch Monitor Module is used to monitor one or more single pole, volt free contacts connected on a single pair of cables and report status to fire control panel.

EN 54-17 & EN 54-18 Certified

Designed for use where space is limited

Allows DIN-Rail mounting

Priority and non-priority settings

Pre-alarm’ status available

XP95, Discovery compatible
Read more
wishlist

Out of Stock
APOLLO ADDRESSBLE FIRE XP95 OPEN-AREA VID – WHITE BODY (WHITE FLASH) – ISOLATING 55000-010APO
₦0.00
The XP95 Open-Area VID is a local-area visual indicator designed for indoor use. The visual indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.

High intensity LEDs

More reliable than xenon visual indicators

Automatic LED check

Lockable

Wide angle of visibility

Enables DDA compliance

Synchronised flash

Can be used with Discovery or XP95
Read more
wishlist

Out of Stock
APOLLO FIRE ALARM ADDRESSABLE DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO
₦0.00
The Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.

Suitable for weatherproof applications

Reports an alarm in under 0.2 seconds

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95 & Discovery compatible
Read more
wishlist

Out of Stock
APOLLO Fire Alarm Discovery UL Manual Pull Station – Dual Action
The Discovery UL Manual Pull Station is used to manually initiate an alarm signal on the fire detection system.

UL38 Certified

Reports an alarm in under 0.2 seconds

Key lock

Easily resettable

Suitable for semi flush or surface mounting

XP95, (Discovery and CoreProtocol compatible)
Read more
wishlist

Out of Stock
APOLLO ISOLATOR BASE

The Isolator Base is unique and designed to only accept the Isolator 55000-720.

Read more
wishlist

Out of Stock
APOLLO SOTERIA UL BASE 4”
The Soteria UL Base – 4″ base is an easy-fit 4″ base, compatible with Apollo’s latest Soteria UL and XP95A detector ranges.

Single base that supports isolated Soteria UL and non-isolated XP95A detectors

8 bit address card for additional address support when used with Soteria UL detectors and CoreProtocol

Designed to replace shallow and deep bases

Easy-fit, easy to install and saving time
Read more
wishlist

Out of Stock
APOLLO XP95A RELAY OUTPUT MODULE
The XP95A Relay Output Module provides a single 2-pole changeover relay.

Loop-powered

Can be placed anywhere on loop
Read more
wishlist

Out of Stock
APOLLO XPERT 7 BASE 4″

The base is a low insertion force base with stainless steel contacts allowing easy and quick installation.

XPERT addressing

XPERT cards supplied with all bases

Locking feature to prevent unauthorized detector removal

Ideal for the XP95A detector range

Read more
wishlist

Out of Stock
Apollo(Fire Alarm) AlarmSense Base Sounder Part No. 45681-510APO
Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.

70d-87dB(A) sound output.

Certified to EN54-3 by UL International (UK) Limited.

Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.

AlarmSense priority/non priority signal recognition

Detects the removal of a detector head and reports a fault

Continues to work during unauthorised removal of detector.

High and low volume ranges

Red and white caps available for stand-alone use.

Can also be purchased as part of a detector/sounder base combination (see Combination AlarmSense Devices section below).

Download datasheet
Read more
wishlist

C-TEC CFP 8 Zone Conventional Fire Alarm Panel – Certified to EN54 Standards
₦110,000.00 – ₦169,500.00
Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.

Two on-board relays (Fire and Fault).

Two open-collector outputs (Remote and Reset).

‘Class change’ and alert inputs.

Installer-friendly design.

Attractive flush or surface mountable plastic lid and enclosure – no bezel required.

Low 25mA quiescent current.

Multiple indicators.

System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system) and optional CFP relay boards.

Space for two x 12V 3.3Ah VRLA batteries.

Fully compatible with C-TEC’s ActiV fire detectors, sounders and visual alarm devices.
Select options
wishlist

C-TEC CFP Standard 4 Zone Conventional Fire Alarm Panel Part No. CFP704-4
Original price was: ₦132,500.00.Current price is: ₦129,500.00.
Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB)

Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry

Manufactured by C-TEC in the UK

Eight detector zone circuits

Four conventional sounder circuits

Integral 1.5A EN54-4/A2 compliant switch mode PSU

Wide range of test and fault-finding facilities

Four open-collector outputs (Fire, Fault, Remote and Reset)

‘Class change’ and alert inputs

Installer-friendly design

Attractive flush or surface mountable plastic lid and enclosure – no bezel required

Low 25mA quiescent current

Multiple indicators

No system expansion connections

Fully compatible with C-TEC’s ActiV range of conventional fire detectors
Add to cart
wishlist

C-TEC CONVENTIONAL Fire Alarm ActiV Relay Base with Diode Part No. C4408DR
Original price was: ₦4,000.00.Current price is: ₦3,000.00.
Compatible with C-TEC’s entire range of ActiV fire detectors.

Includes a 1A @ 24 VDC relay controlled by detector’s remote LED output.

Ideal for switching CCTV, security and door retaining systems.

Third-party certified to the relevant parts of EN54 in conjunction with our ActiV detectors.

Easy to fit with lots of working space.

Can be ceiling mounted in any orientation due to the true 360° degree viewing angle of the LED indicator strips on all ActiV detectors.

Integrated detector/base locking mechanism, head removal tool and ID tag.

Simple ‘click and twist’ design.

Remote LED terminals for the optional connection to a BF318 Remote indicator.

C4408R non-diode relay base also available for use on systems that do not require head out monitoring.

Download datasheet
Add to cart
wishlist

C-TEC Fire Alarm ActiV Optical Smoke Detector Part No. C4416
Original price was: ₦27,500.00.Current price is: ₦24,200.00.
DESCRIPTION

A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.

Manufactured by C-TEC in the UK.

Third-party certified to EN54-5 by Intertek.

Wide 6-33V DC operating voltage.

Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.

Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.

Download datasheet
Add to cart

No items found.