Category: Fire Alarm System

Showing 113–128 of 460 results

wishlist

CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (8 Output Per Zone Relays)
₦0.00

CFP Relay Output Card (8 Output Per Zone Relays) Part No. CFP764 An optional system expansion device for use with CFP708-4 Standard 8 Zone Fire Panels or CFP708-2 AlarmSense 8 Zone Fire Panels. Provides eight output per zone relays which will changeover when the corresponding zone is in alarm (subject to certain conditions – for full details refer to …

CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (8 Output Per Zone Relays)Read More

Add to cart

CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (Reset, Fault, Aux. & Remote Relay Outputs)

₦0.00

Product dimensions (mm)	82 W x 125 H x D 23mm.
Weight	64g.
Properties	Single pole changeover contacts; Rated at 1A 50V; 50V Isolation between relays, contacts and CFP & relays; 27mA active relay coil current @ 27.6V supply.

Sale!

wishlist

Ctec Fire Alarm Red Plastic Fire Panel Key
Original price was: ₦3,000.00.Current price is: ₦2,000.00.

Red Plastic Fire Panel Key Part No. S-KEY A spare plastic S-KEY for use C-TEC’s CFP, XFP and ZFP fire panels. Provides authorised users with access to a fire panel’s authorised user controls. Finished in red polycarbonate for extra strength. See tech. specs below for full panel compatibility details. Download datasheet Compatibility Suitable for use with …

Ctec Fire Alarm Red Plastic Fire Panel KeyRead More

Add to cart
Sale!

wishlist

CTECH Economy REMOTE Status Unit FOR EXTINGUISHER Part No. EP211
Original price was: ₦95,000.00.Current price is: ₦85,000.00.
Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.

Includes a mode (auto/manual) keyswitch.

Mounts on a standard UK single gang 25mm flush or surface back box.

Max. 8 economy status units per EP203 panel.

Download datasheet
Add to cart
wishlist

Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
Model: VDOT-ASD-400

Detection Light Source: High-power blue LED

Smoke Detection Range: 0.001% – 25%/m

Alarm Sensitivity Range: 0.005% – 20%/m

Event Log Capacity: 25,000 events

Relay Outputs: 7

Control Panel: 3-in-1 Control/Display/Programmer Front Panel

Network Connectivity: RS485, Modbus RTU Open Protocol

Event Types: Alarm, Fault, Operation, Smoke, Flow, Auxiliary Gas Sensors
Read more
wishlist

Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel ~ VDOT-ASD-100
Four Alarm Levels

7 Relay Outputs

3 in 1 Control/Display/Programmer Front PanelRS485 Network

Support Modbus RTU Open Protoc
Read more
wishlist

EDB01 Reflective Beam Smoke Detector
₦0.00

General Description The EDB01 Reflective Beam Smoke Detector is a single unit comprising a transmitter and a receiver. The transmitter projects a cone shaped beam of modulated infra-red light to prisms. An alarm condition will be determined when the signal is analyzed to reach up to the settings of retention of smoke (4 sensitivity levels). In addition, the …

EDB01 Reflective Beam Smoke Detector Read More

Read more
wishlist

Ei Electronics Ei100BNX Aico Ionisation Smoke Fire Alarm System-Battery Operated, White
High sensitivity – responds to all standard fires

Dual ionisation chamber which offers quick response to fast flaming fires

Battery powered 9 volts (supplied)

Built-in sounder to give a minimum sound output of 85dB(A) at 3m

Bleeps every 40 seconds when the battery needs replacing

Easily installed – no wiring

Test Button simulates smoke – use to check performance at least monthly

5-year guarantee
Read more
wishlist

Elevate Fire Safety with Gent S4-34740 Beam Sensor Pair – Advanced Technology and Compatibility

Enhance your fire safety measures with the Gent S4-34740 Beam Sensor Pair, consisting of a Transmitter and Receiver (Bracket and Base excluded). These cutting-edge beam sensors utilize Vigilon’s loop powered technology, allowing up to 16 beam pairs on the same loop circuit, covering distances of up to 100m without the need for additional power supply …

Elevate Fire Safety with Gent S4-34740 Beam Sensor Pair – Advanced Technology and CompatibilityRead More

Read more
wishlist

Elevate Fire Safety with Gent S4-34741-03 Parallel Bracket and Base: Adjustable Linear Beam Detection for Reliable Performance!

Optimize your linear beam detection with the Gent S4-34741-03 Parallel Bracket and Base for standard applications, offering adjustable angles up to + / – 15°. This beam sensor is a market-leading solution, providing an enhanced alternative to point detection in situations where it is impractical or uneconomical. Powered and controlled via the loop, it features …

Elevate Fire Safety with Gent S4-34741-03 Parallel Bracket and Base: Adjustable Linear Beam Detection for Reliable Performance!Read More

Read more
wishlist

Elevate Fire Safety with Gent S4-34892 Protective Cover – Pack of 20 for S4-34800 and S4-34805 Call Points

Gent S4-34892 Protective Cover for S4-34800 and S4-34805 (Pack of 20)

The S4-34892 is a protective cover designed for the S4-34800 and S4-34805 Call Points.

Read more
wishlist

Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface Technology

Upgrade your fire safety system with the Gent Vigilon Single Channel Mains Switching Interface with Enclosure – S4-34401. Engineered for seamless integration with the Vigilon system, this interface unit delivers heavy-duty relay switching for both 24V and 230V applications. Dive into the details of this cutting-edge product designed to elevate your building controls and damper …

Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface TechnologyRead More

Read more
wishlist

Elevate Fire System Connectivity with Gent VSINTSC-PCB04 – Spare PCB for S4 I/F

Gent VSINTSC-PCB04 Spare PCB for S4 Four Channel Mains Switching I/F (S4-34404)

The VSINTSC-PCB04 is a spare PCB for the S4 Four Channel Mains Switching I/F – product code: S4-34404.

The Gent Interface range features several different types of interfaces which can be used depending on the requirements of the individual site.

Gent Low Voltage Interfaces

The standard Gent Interfaces are low voltage versions which are ideal for connecting the fire alarm system to standard services around a building. There are both input and output versions available with a variety of numbers of channels. To compliment the interface range there is also various mounting options to pick from.

Gent Mains Rated Interfaces for Vigilon Systems

For applications where the interface is required to be mains rated there are options available. These units are capable of switching a 240v supply on activation of a fire alarm system. They are ideal for connecting the fire system to services such as roller shutter doors or door systems using a mains voltage.

Gent Vigilon Interfaces with Metal Enclosures

There are new Gent interfaces available which use a plastic type enclosure. However traditionally the Gent Interface range used a metal housing. There are still units available which feature these enclosures. They can be viewed within our product portfolio.

Read more
wishlist

Elevate Safety with S-Quad Multifunction Devices | White S4-911-V-VAD-HPW | Advanced Sensors and Visual Alarms

The S-Quad range of multifunction devices includes sensors with sounder, speech and EN54-23-certified visual alarms. This allows the maximum flexibility for designers providing cover for a building. The advanced sensing technology is enhanced with a device that can alert building occupants with a highly visible visual alarm and a recorded voice message to ensure all occupants are alerted to an emergency.

Innovative design has allowed the LED visual alarm to be built into the centre of the sensor with the sounder and speech circuits inside providing a neat and aesthetic solution to multi-function devices.

Read more
wishlist

Elevate Style and Security with Gent VS-ODOOR-PLUS: Outer Door for VIGPLUS-24 & VIGPLUS-72 (Black)
Gent VS-ODOOR-PLUS Outer Door for VIGPLUS-24 & VIGPLUS-72 (Black)

The VS-ODOOR-PLUS is an Outer Door for the VIGPLUS-24 and VIGPLUS-72.

Key Features

Supplied in Black
Read more
wishlist

Enhance Fire Safety with Gent S3 Voice Sounder – S3-V-R | Loop Powered System

Gent S3 Voice Sounder with Red Body – S3-V-R
S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms. Combined with flexible configuration from the Gent by Honeywell fire control panels, this loop powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation. Very low power consumption means that the Vigilon system offers more high performance sounders and VADs on the loop than any other manufacturer

Read more