Category: replacement accessories

Showing 33–48 of 84 results

Sale!

wishlist

Gent Fire Alarm Loop Card for Legacy Vigilon Compact COMPACT-LPC
Original price was: ₦250,000.00.Current price is: ₦238,500.00.

Gent COMPACT-LPC Loop Card for Legacy Vigilon Compact The Gent COMPACT-LPC is a single loop card for use with the Gent Vigilon Compact fire alarm control panel, only use with legacy panels such as V3+ Systems. This loop card allows the addition of an additional loop circuit onto a Gent Vigilon Compact fire alarm panel. …

Gent Fire Alarm Loop Card for Legacy Vigilon Compact COMPACT-LPCRead More

Add to cart
Sale!

wishlist

Gent Fire Alarm Network Card V3+ VIG-NC-V3+
Original price was: ₦355,000.00.Current price is: ₦349,500.00.

Gent VIG-NC-V3+ Network Card V3+

This network card is used to allow messages of status and control data to pass between control panels and network (or terminal) nodes in a networked fire system. The card must be plugged into the backplane of each panel and node in a dedicated slot. When it is plugged into the slot P8 on the backplane the external cables must be connected to terminal block P10, which is also located on the backplane. The dual-in-line switches on the card are set to program the address number and baud rate.

Add to cart
Sale!

wishlist

Gent Fire Alarm Network Card VIG-NC
Original price was: ₦355,000.00.Current price is: ₦349,500.00.
Gent VIG-NC Network Card

The VIG-NC is a Network Card for Vigilon Analogue Addressable Fire Detection Systems. It is used to expand the Gent Vigilon Plus and Gent Vigilon fire alarm network

The Vigilon panel manages up to 6 loops each accommodating up to 200 devices on each loop, including repeat panels, interfaces, call points, sensors and sounders. The Vigilon panel is available with 24 and 72 hour standby options. Advanced networking options allow multi domain networks of up to 200 panels/nodes with options of copper or fibre connections.
Add to cart
wishlist

Gent Fire Alarm Printer Roll For Vig and 34000 (VS-PROLL)

Honeywell Gent (VS-PROLL) Printer Roll For Vig and 34000

The Gent VS-PROLL is a Printer Roll For Vig and 34000.

Read more
wishlist

Gent Fire Alarm Replacement Backplane PCB for Vigilon Panels (VS-BPLANE)

Gent VS-BPLANE Replacement Backplane PCB for Vigilon Panels

The VS-BPLANE is a replacement Backplane PCB designed for Vigilon Panels

Read more
wishlist

Gent Fire Alarm Replacement Card for Loop Powered Interface VSINTL-PCB (34450)

Gent VSINTL-PCB Replacement Card for Loop Powered Interface (34450)

The VSINTL-PCB from Gent is a Replacement Card for Loop Powered Interface (34450).

Read more
wishlist

Gent Fire Alarm Replacement Lock for Vigilon and Compact Outer Door VS-ODLOCK
DESCRIPTION

Gent VS-ODLOCK Replacement Lock for Vigilon and Compact Outer Door

Replacement Cabinet Lock for Vigilon & Compact Panels

Key Features

Supplied with 2 x 550 Keys
Read more
wishlist

Gent Fire Alarm Replacement MRC for New Repeat, A3 & A2 Mimic (BS & EN) VSRPT-MRC-72

Gent VSRPT-MRC-72 Replacement MRC for New Repeat, A3 & A2 Mimic (BS & EN)

The replacement Master Repeat Card (MRC) Mark-4 (VSRPT-MRC-72 or CP4S-RPT-MRC-XXX) is designed for installation into a new Repeat panel or A3 Mimic panel, that are wired on to a loop of an EN54 or BS5839 analogue and addressable fire detection and alarm systems.

Read more
wishlist

Gent Fire Alarm Replacement MRC for New Repeat, A3 & A2 Mimic (BS & EN) VSRPT-MRC-72

Gent VSRPT-MRC-72 Replacement MRC for New Repeat, A3 & A2 Mimic (BS & EN)

The replacement Master Repeat Card (MRC) Mark-4 (VSRPT-MRC-72 or CP4S-RPT-MRC-XXX) is designed for installation into a new Repeat panel or A3 Mimic panel, that are wired on to a loop of an EN54 or BS5839 analogue and addressable fire detection and alarm systems.

Read more
wishlist

GENT Fire Alarm REPLACEMENT OUTER DOOR FOR VIGPLUS-24/72 (BLACK) VCS-ODOOR-PLUS
The Gent VCS-ODOOR-PLUS is a spare / replacement black outer door assembly for use with the Gent Vigilon Compact Plus panel.

Key Features

Supplied in Black
Read more
wishlist

Gent Fire Alarm Replacement Vigilon Printer – VS-PRIN

Gent Replacement Vigilon Printer – VS-PRIN

The VS-PRIN is a replacement printer assembly for the Vigilon range of control panels. This thermal printer uses Thermal Paper Rolls.

Read more
wishlist

Gent Fire Alarm S-Quad Protective cage(781550)

Protective cage for detectors
Steel basket for protection from damage and also unauthorized disconnection of the detector

Read more
wishlist

Gent Fire Alarm Single Mode Fibre VIG-NC-SMF

The Single Mode Fibre Network Card (VIG-NC-SMF) allows a fast and reliable network over distances of up to 20km between Vigilon Plus Panels (VIGPLUS-24, VIGPLUS-72) / Network Nodes (VIGPLUS-NODE).
The Single Mode Fibre Network card is designed to plug into the backplane of a panel or node in dedicated slots.
Fibre optic connects directly to the sockets on the card.
Up to 31 panels/nodes on a single network.
Up to 200 panels/nodes on a complex networks.

Read more
wishlist

Gent Fire Alarm Spare Bulgin Key – Pack of 1014115-KEY
Gent 14115-KEY Spare Bulgin Key – Pack of 10

A spare Bulgin Key for 14115-08 key operated (pack of 10).

For use with Bulgin Key Switches (SM0319, SM0320, SM0324) and Gent key operated call points.

Bulgin keyswitches were used on the following older Gent Fire Alarm Panels for enable/disable functions:

Fire Alarm Model 3225

Fire Alarm Model 3226

Fire Alarm Model 3228

Fire Alarm Model 3280
Read more
wishlist

Gent Fire Alarm Square Replacement Glass – 14112-09EN (Pack of 10)

The 14112-09EN from Gent is a pack of replacement glasses for the square ‘old-style’ Gent Manual Call Points. They are frangible glass type which are designed to break when pushed.

Read more
wishlist

Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP

Gent S4-34499 Set of Keys for Key Switch Interface and MCP (1 Set = 2 Keys)

Read more

No items found.