Aico Ei103C Battery Heat Alarm | Conventional Fire Alarm System

Powered with a 9V Alkaline battery
Fast response thermistor, best for detecting heat build-up from large flaming fires
Alarm temperature range, 54°C to 62°C
Hard-wire interconnect up to 12 Alarms
Built-in Test button
Low battery audible warning

Compare

The Aico Ei103C Heat Alarm is a class A heat-sensing device designed for domestic dwellings. The alarm gives a fire warning when it senses an ambient temperature of 58°C. Heat alarms are recommended for use in kitchens and garages, where the use of smoke alarms may lead to unwanted nuisance alarms.

The battery-removed indicator is a very important safety feature of this alarm. If the battery has been removed a pop-up warning flag appears and it is not possible to replace the alarm cover until a new battery has been
fitted.

The Ei103C Heat Alarm is fitted with a ‘Test’ button to facilitate frequent testing of the alarm. When the battery is nearing its end of life the alarm will emit a short beep every 40 seconds to indicate that the battery needs replacing.

The alarm may be hardwire interconnected with up to 12 other 9V battery-powered Aico alarms provided they have the interconnect feature. The alarm must not be used as a stand-alone alarm and must be linked with
other smoke alarms on the property

TECHNICAL SPECIFICATION

Sensor Type: Thermistor
Supply Voltage: 9V battery
Horn: Piezoelectric
Sound Level: 85 dB(A) at 3 metres
Temperature: Operating – 0°C to 40°C
Storage – 0°C to 35°C (in a dry area)
Humidity Range: 15% to 95% Relative Humidity
Button Test: Simulates the eect of smoke and checks chamber, electronics and horn
Self Test: The smoke chamber and battery is automatically tested every 40 seconds
Indicator Light: Red flash every 40 seconds – Power
Plastic material: HIP UL 94 HB Flame Retardant

Dimensions:

Product – 140mm x 120mm x 55mm
Package – 145mm x 130mm x 60mm