- Burglary Alarm System
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Fire Alarm System
- Addressable fire alarm
- Apiration Systems
- Conventional Fire Alarm
- Fire Suppression system
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
- Access Control Accessories
- Door access control
- Gates Access control
- Time and Attendance systems
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
Zeta Fyreye MKII Conventional Fire Alarm Fixed Heat (CS) Detector MKII-HF/CS90
The Fyreye Rate of Rise heat detectors (MKII-HFCS90) use a thermistor arrangement to sense a quick rise in
temperature and also a final threshold temperature of 90°C. The Fyreye fixed heat detector (MKII-HF/CS90) has a single thermistor arrangement that gives an alarm at a temperature of 90°C.
There are 4 types of mounting base available; standard or deep and with or without diode.
Fyreye MkII Conventional Detectors – Smoke and Heat Detection for Ultimate Safety
Introducing the Fyreye MkII Conventional Detectors, the cutting-edge solution to ensure your home or workplace is safeguarded against potential fire hazards. Our detectors come in various models to cater to your specific needs: MKII-OP, MKII-OH, MKII-HF, MKII-HF/CS90, and MKII-HR. Whether it’s optically dense smoke, quick temperature rises, or fixed heat detection, Fyreye has got you covered.
Optical Smoke Detection (MKII-OP): The MKII-OP detector utilizes a pulsing IR LED and photodiode to identify the presence of smoke particles in the air. This technology is highly effective in detecting materials like soft furnishings, PVC, plastic, foam, and more, producing small visible particles ranging from 0.5 to 10μm. With a coverage area of up to 100m², it ensures swift detection and response in the event of a fire.
Heat Detection (MKII-HR & MKII-HF): Our heat detectors, MKII-HR and MKII-HF, are designed to sense temperature changes accurately. MKII-HR reacts to rapid temperature increases and triggers an alarm at 57°C, while MKII-HF functions as a fixed heat detector with a similar 57°C trigger point. These detectors are ideal for areas where smoke detection might not be suitable but fire safety remains a top priority.
- EN54 Compliant: Our detectors are designed to meet EN54 requirements, ensuring their reliability and compliance with industry standards.
- Lockable Design: Prevent unauthorized removal with a lockable base, enhancing security.
- Remote LED Output: Stay informed even from a distance with remote LED output capability.
- Universal Compatibility: Compatible with all Fyreye bases, making integration seamless and hassle-free.
Bases: Choose from our range of bases to suit your installation needs:
- MKII-CB: Common Base (100 x 16mm, 53g)
- MKII-CB/D: Common Base with Diode (100 x 32mm, 64g)
- MKII-DB: Diode Base (100 x 16mm, 53.2g)
- MKII-DB/D: Diode Base (100 x 32mm, 64.2g)
- Operating Voltage: 9-33V DC
- Quiescent Current: 40μA
- Alarm Current @ 24V DC: 34mA
- Operating Temperature: -10°C to +50°C
- Min. Continuous Temperature: 0°C
- Maximum Humidity: 95% RH (non-condensing)
- Alarm Condition: 2.4% obscuration per meter
- Fixed Heat Trigger: @57°C (MKII-HF & MKII-HR)
- Fixed Heat Trigger: @90°C (MKII-HF/CS90)
- Rate of Rise or Fixed Heat Trigger: @57°C (MKII-HR)
- Coverage Area: Up to 100m² (Smoke Detectors), 50m² (Heat Detectors)
- IP Rating: IP43
- Start-up Time: 10 Seconds
- Size (with Base): Varies by model (refer to product details)
- Weight (with Base): Varies by model (refer to product details)
Invest in Fyreye MkII Conventional Detectors for unparalleled fire detection and protection. With our advanced technology and rigorous standards, your safety is our top priority. Choose Fyreye for peace of mind.
Out of Stock
Gent Fire Alarm G017-01 Flush MCP 470 Ohms M1A-R470FGRead more
Manual call points from Honeywell Gent are easy and safe to operate, with no hammer required. Fully compliant with EN 54-11, each point is manufactured from ABS and both have a break glass and resettable element. For areas susceptible to inadvertent operation – such as sports halls – a stronger, clear polycarbonate cover version is available.
Out of Stock
Gent Fire Alarm Red IP65 deep base wall and ceiling mount sounder. Deep base included.(CWSO-RR-W1)Read more
Honeywell’s Non-Addressable sounder is a high quality device
designed to alert building occupants of an emergency. The product
features a new folded horn design which provides outstanding
sound output at low current draw. With its modern design, global
tone set and extensive installer-friendly features, the sounder is
the logical choice for specifiers, installers and distributors.
Out of Stock
APOLLO Addressable Fire Alarm XPERT 7 BASE 4″ – ISOLATINGRead more
The base senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits.
- Detects wiring short-circuits
- High brightness LED
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
Gent Fire Alarm S4 CO Dual Optical Heat Sensor Voice Sounder High Power White VAD – S4-911-V-VAD-HPW
₦165,000.00Add to cart
Gent S4 CO Dual Optical Heat Sensor Voice Sounder High Power White VAD – S4-911-V-VAD-HPW
The S-Quad range of multifunction devices includes sensors with sounder, speech and EN54-23 certified visual alarms. This allows the maximum flexibility for designers providing cover for a building. The advanced sensing technology is enhanced with a device that can alert building occupants with a highly visible visual alarm and a recorded voice message to ensure all occupants are alerted to an emergency.
Join Risk Free
30 days refund
Online 24 hours
Safe and Secured Payment
On all order over
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in NigeriaRead More