Category: Addressable fire alarm

Showing 49–64 of 244 results

wishlist

Out of Stock
APOLLO FIRE ALARM ADDRESSABLE DISCOVERY MANUAL CALL POINT – OUTDOOR – YELLOW – ISOLATING 58100-953APO
₦0.00
The Manual Call Point is used to control extinguishant release rather than to initiate an alarm signal on the fire detection system.

Suitable for weatherproof applications

Reports an alarm in under 0.2 seconds

‘Plug and Play’ terminal connections for faster wiring

Continuity link for wiring test before commissioning

XP95 & Discovery compatible
Read more
wishlist

Out of Stock
APOLLO Fire Alarm Discovery UL Manual Pull Station – Dual Action
The Discovery UL Manual Pull Station is used to manually initiate an alarm signal on the fire detection system.

UL38 Certified

Reports an alarm in under 0.2 seconds

Key lock

Easily resettable

Suitable for semi flush or surface mounting

XP95, (Discovery and CoreProtocol compatible)
Read more
wishlist

Out of Stock
APOLLO ISOLATOR BASE

The Isolator Base is unique and designed to only accept the Isolator 55000-720.

Read more
wishlist

Out of Stock
APOLLO SOTERIA UL BASE 4”
The Soteria UL Base – 4″ base is an easy-fit 4″ base, compatible with Apollo’s latest Soteria UL and XP95A detector ranges.

Single base that supports isolated Soteria UL and non-isolated XP95A detectors

8 bit address card for additional address support when used with Soteria UL detectors and CoreProtocol

Designed to replace shallow and deep bases

Easy-fit, easy to install and saving time
Read more
wishlist

Out of Stock
APOLLO XP95A RELAY OUTPUT MODULE
The XP95A Relay Output Module provides a single 2-pole changeover relay.

Loop-powered

Can be placed anywhere on loop
Read more
wishlist

Out of Stock
APOLLO XPERT 7 BASE 4″

The base is a low insertion force base with stainless steel contacts allowing easy and quick installation.

XPERT addressing

XPERT cards supplied with all bases

Locking feature to prevent unauthorized detector removal

Ideal for the XP95A detector range

Read more
wishlist

Out of Stock
Apollo(Fire Alarm) AlarmSense Base Sounder Part No. 45681-510APO
Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.

70d-87dB(A) sound output.

Certified to EN54-3 by UL International (UK) Limited.

Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.

AlarmSense priority/non priority signal recognition

Detects the removal of a detector head and reports a fault

Continues to work during unauthorised removal of detector.

High and low volume ranges

Red and white caps available for stand-alone use.

Can also be purchased as part of a detector/sounder base combination (see Combination AlarmSense Devices section below).

Download datasheet
Read more
wishlist

C-TEC Fire Alarm ActiV Optical Smoke Detector Part No. C4416
Original price was: ₦27,500.00.Current price is: ₦24,200.00.
DESCRIPTION

A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.

Manufactured by C-TEC in the UK.

Third-party certified to EN54-5 by Intertek.

Wide 6-33V DC operating voltage.

Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.

Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.

Download datasheet
Add to cart
wishlist

Out of Stock
C-tec Fire Alarm ActiV 96dB(A) Conventional Base Sounder Part No. BF431C/CC/W
Third-party certified to EN54-3 (Sounders).

Impressive 96dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Alarm Current at 30Vdc = 5.5mA

Alarm Current at 18Vdc = 3.8mA

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
wishlist

Out of Stock
C-tec Fire Alarm ActiV Conventional ‘C Class’ Base VAD c/w Voice Sounder Part No. BF457C/CC/W
Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
wishlist

Out of Stock
C-tec Fire Alarm ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W
Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
wishlist

C-TEC Fire Alarm ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (shallow base) Part No. BF433C/CC/SR
Original price was: ₦48,000.00.Current price is: ₦45,000.00.
Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).

Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD.

Impressive 100dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)

Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)

IP21C rated.

Manufactured in the UK by C-TEC.
Add to cart
wishlist

Out of Stock
C-Tec Fire Alarm ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w Voice Sounder (deep base) Part No. BF447C/CC/DR
Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Can also be used as a W-4-4 VAD.

Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

IP33C rated.

Manufactured in the UK by C-TEC.

Download datasheet
Read more
wishlist

Out of Stock
C-tec Fire Alarm ActiV Conventional Weatherproof Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (IP55) Part No. BF433C/CC/DR/65
Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).

Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as W-4-4 VAD.

Impressive 100dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)

Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)

IP55C rated (weatherproof).

Manufactured in the UK by C-TEC.

Download datasheet
Read more
wishlist

C-TEC Fire Alarm CONVENTIONAL ActiV High 75ºC Fixed Temp. Heat Detector Part No. C4403B
Original price was: ₦20,000.00.Current price is: ₦18,500.00.
A high-quality Type B high fixed temperature (75ºC) heat detector offering outstanding detection performance at a very competitive price.

Manufactured by C-TEC in the UK.

Third-party certified to EN54-5 by Intertek.

Wide 6-33V DC operating voltage.

Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.

Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.

Download datasheet
Add to cart
wishlist

Out of Stock
C-tec Fire Alarm STI Universal Call Point Stopper, Flush Mount with Sounder Part No. STI-13020FR
₦0.00
IP56 rated protective cover for flush mounted manual call points.

Suitable for indoor and outdoor use.

Helps prevent malicious activation by emitting a piercing 96dB alarm tone when its hinged cover is lifted.

Comprises a clear, tamper proof cover and frame that retrofits over all known break glass call points.

Ideal for schools, colleges, hospitals and other areas where there is a threat of false activation.

Kit includes one Universal Stopper frame, a red header labelled ‘IN CASE OF FIRE – LIFT BREAK GLASS’ and one break seal.

Surface and non-sounder variants also available (see variants tab below).

Main picture shows Universal Stopper with a Manual Call Point. The call point is NOT supplied.

Download datasheet
Read more

No items found.