Category
- Burglary Alarm System
- Cable
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
- Promotions
Popular
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦6,250,000.00Original price was: ₦6,250,000.00.₦6,170,000.00Current price is: ₦6,170,000.00. -
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦22,000.00Original price was: ₦22,000.00.₦18,500.00Current price is: ₦18,500.00. -
PAXTON ACCESS CONTROL NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET
₦462,000.00Original price was: ₦462,000.00.₦458,000.00Current price is: ₦458,000.00. -
Concept Handheld Metal Detector with Vibration Function
₦20,000.00Original price was: ₦20,000.00.₦19,000.00Current price is: ₦19,000.00. -
Fisher Research Labs M-scope Walk-Through Metal Detector
₦4,600,000.00Original price was: ₦4,600,000.00.₦4,500,000.00Current price is: ₦4,500,000.00. -
CONCEPT (Burglar Alarm) WIRELESS SIGNAL REPEATER
₦23,500.00Original price was: ₦23,500.00.₦21,500.00Current price is: ₦21,500.00. -
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00Original price was: ₦13,000.00.₦11,000.00Current price is: ₦11,000.00.
Category: Conventional Fire Alarm
Showing 17–32 of 156 results
-
APOLLO ADDRESSABLE FIRE ALARM XP95 I.S. OPTICAL SMOKE DETECTOR 55000-640APO
₦35,000.00Original price was: ₦35,000.00.₦33,500.00Current price is: ₦33,500.00.Add to cartThe XP95 I.S. Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
Out of Stock
APOLLO ADDRESSABLE FIRE ALARM XP95 OPEN-AREA VAD CAT. C – WHITE BODY (WHITE FLASH) (C-3-15) – ISOLATOR KIT 55000-748APO
₦0.00Read moreThe XP95 Open-Area VAD Cat. C is specifically designed for use on a ceiling. These devices are used to supplement sounders in areas which carry the risk that sounders will not be heard.
- Uses high intensity LED
- EN 54-23 Compliant Category C VAD
- Flash rate 0.5Hz
- Fault signal if LED check failed
- Locking mechanism (grub screw)
- Wide angle of visibility
- Synchronised flash rates with the Apollo Protocol
-
Out of Stock
APOLLO ADDRESSABLE FIRE ALARM XP95 OPEN-AREA VID – AMBER BODY (AMBER FLASH) 55000-879APO
₦0.00Read moreThe XP95 Open-Area VID is a local-area visual indicator designed for indoor use. The visual indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.
- High intensity LEDs
- More reliable than xenon visual indicators
- Automatic LED check
- Lockable
- Wide angle of visibility
- Enables DDA compliance
- Synchronised flash
- Can be used with Discovery or XP95
-
APOLLO ADDRESSABLE FIRE ALARM XP95 OPTICAL SMOKE DETECTOR 55000-620APO
₦35,000.00Original price was: ₦35,000.00.₦32,500.00Current price is: ₦32,500.00.Add to cartThe XP95 Optical Smoke Detector uses the light scatter principle to quickly and effectively detect a range of slow burning and smouldering fires.
- Reliable fire detection in areas with a wide temperature range from -20°C to +60°C
- Ideal for escape routes
- Unaffected by wind and atmospheric pressure
- Insect resistant screen
-
Out of Stock
APOLLO Addressable Fire Alarm XP95A OPEN-AREA SOUNDER – RED BODY – ISOLATING
Read moreThe XP95A Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery UL or XP95A system.
- For use with XP95A and Discovery UL systems
- Self-test fault monitoring
- Two volume settings 92dB(A) and 100dB(a)
- Built in isolator
- Synchronisation of tones
- Individual and group addressing
- Red or white options
- Loop powered
- IP65 rated
-
Out of Stock
APOLLO Addressable Fire Alarm XPERT 7 BASE 4″ – ISOLATING
Read moreThe base senses short-circuit faults on Discovery loops and spurs and minimises disruption from short circuits.
- Detects wiring short-circuits
- High brightness LED
- Up to 20 detectors or their equivalent load, may be installed between isolating bases
-
C-TEC CFP 8 Zone Conventional Fire Alarm Panel – Certified to EN54 Standards
₦110,000.00 – ₦169,500.00Select options- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system) and optional CFP relay boards.
- Space for two x 12V 3.3Ah VRLA batteries.
- Fully compatible with C-TEC’s ActiV fire detectors, sounders and visual alarm devices.
-
C-TEC CFP Standard 4 Zone Conventional Fire Alarm Panel Part No. CFP704-4
₦132,500.00Original price was: ₦132,500.00.₦129,500.00Current price is: ₦129,500.00.Add to cart- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB)
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry
- Manufactured by C-TEC in the UK
- Eight detector zone circuits
- Four conventional sounder circuits
- Integral 1.5A EN54-4/A2 compliant switch mode PSU
- Wide range of test and fault-finding facilities
- Four open-collector outputs (Fire, Fault, Remote and Reset)
- ‘Class change’ and alert inputs
- Installer-friendly design
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required
- Low 25mA quiescent current
- Multiple indicators
- No system expansion connections
- Fully compatible with C-TEC’s ActiV range of conventional fire detectors
-
C-TEC Fire Alarm ActiV Rate of Rise Heat Detector C4403A1R
₦26,000.00Original price was: ₦26,000.00.₦24,200.00Current price is: ₦24,200.00.Add to cart- A high-quality Type A1R static/rate of rise heat detector offering outstanding detection performance at a very competitive price.
- Manufactured by C-TEC in the UK.
- Third-party certified to EN54-5 by Intertek.
- Wide 6-33V DC operating voltage.
- Two 8mm x 2mm ultra-bright red LED indicating strips offering 360º visibility.
- Compatible with our ActiV C4408D diode, C4408 non-diode and C4408R relay bases.
-
Out of Stock
C-tec Fire Alarm ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W
Read more-
-
-
- Superb sound intelligibility.
- Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
- Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
- Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
-
C-TEC Fire Alarm ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (shallow base) Part No. BF433C/CC/SR
₦48,000.00Original price was: ₦48,000.00.₦45,000.00Current price is: ₦45,000.00.Add to cart- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD.
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- IP21C rated.
- Manufactured in the UK by C-TEC.
-
Out of Stock
C-Tec Fire Alarm ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w Voice Sounder (deep base) Part No. BF447C/CC/DR
Read more-
-
-
- Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Can also be used as a W-4-4 VAD.
- Superb sound intelligibility.
- Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)
- Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)
- IP33C rated.
- Manufactured in the UK by C-TEC.
-
-
-
-
Out of Stock
C-tec Fire Alarm ActiV Conventional Weatherproof Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (IP55) Part No. BF433C/CC/DR/65
Read more-
-
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as W-4-4 VAD.
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- IP55C rated (weatherproof).
- Manufactured in the UK by C-TEC.
-
-
-
C-TEC FP 4 Zone Conventional Fire Alarm Panel (expandable to 6 zones) Part No. FF384-2
₦90,000.00Original price was: ₦90,000.00.₦80,000.00Current price is: ₦80,000.00.Add to cart-
-
-
- Installer-friendly design.
- Robust metal enclosure c/w lift off lid & heavy-duty base connections.
- Four conventional Zone circuits (expandable to 6).
- Two conventional Sounder circuits.
- Separate indicators for open & short circuit fault, sounder fault and battery/power supply fault.
- Non-latching class change sounder output, latching fire & non-latching fault outputs (via expansion loom).
- Short circuit=fire facility (pre-1980 BS, no resistors in call points, selectable on a zone by zone basis).
- Ancillary connections for repeaters & other system add-ons including fault relay modules, fire relay modules, sounder delay relay modules, sounder extender kits, etc).
- Multi-lingual variants (subject to quantities).
- Space for 2 x 12V 3.2Ah VRLA batteries.
- Compatible with virtually all known conventional fire detectors including C-TEC’s ActiV range.
- Designed to comply with BS 5839-4 (this panel in not compliant with EN54-2/4 and should NOT be used in new UK or European installations).
-
-
-
-
Out of Stock
C-TECH ActiV Conventional FIRE ALARM SYSTEM C-3-8.5 Base VAD c/w 96dB(A) Sounder Part No. BF456C/CC/W
₦0.00Read more-
-
- Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).
- Provides ‘O-R-3-2.5-17’ light distribution.
- Ideally suited for use in corridors and other rectangular areas.
- Impressive 96dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)
- Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)
- Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
-
C-TECH CONVENTIONAL FIRE ALARM CFP 2 Zone Fire Alarm Panel-CFP702-2
₦119,000.00Original price was: ₦119,000.00.₦115,000.00Current price is: ₦115,000.00.Add to cart- Third-party certified to EN54 parts 2 and 4 by the Loss Prevention Certification Board (LPCB).
- Intuitive user-friendly interface with colour-coded buttons and combined keypad/keyswitch entry.
- Manufactured by C-TEC in the UK.
- Two AlarmSense zone circuits – compatible with Apollo’s AlarmSense detectors, call points, sounders and visual indicators.
- Four conventional sounder circuits.
- Integral 1.5A EN54-4/A2 compliant switch mode PSU.
- Wide range of engineering functions including zone test, coincidence, zone delay and non-latching zones.
- Two on-board relays (Fire and Fault).
- Two open-collector outputs (Remote and Reset).
- ‘Class change’ and alert inputs.
- Installer-friendly design.
- Attractive flush or surface mountable plastic lid and enclosure – no bezel required.
- Low 25mA quiescent current.
- Multiple indicators.
- System expansion connections provided for up to eight two-wire repeaters (one CFP761 network card required per system).
- Space for two x 12V 3.3Ah VRLA batteries.
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Safe and Secured Payment
On all order over
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More