Gent Fire Alarm Beam Sensors Pair (Transmitter & Receiver) Excluding Bracket and BaseS4-34740

Gent S4-34740 Addressable Beam Sensor Pair

Gent S4-34740 S-Quad Addressable Loop Powered Beam Sensors Pair provides an enhanced solution for linear beam detection for applications where point detection is either not practical or economic.

Compare

Description
Our S-Quad Beam Sensors provides an enhanced solution for linear beam detection for
applications where point detection is either not practical or economic.

Vigilon’s loop powered technology allows up to 16 beam pairs to be
connected to the same loop circuit, each covering a distance of up
to 100m without the need for an external Power Supply Unit, wiring or
interfacing.
Compatible with the full range of Vigilon and Nano control panels the
S-Quad beam uses the panel software to ensure a fast response to fi re
while offering software filters to reduce the number of unwanted alarms.

Beam Transmitter
• Loop Powered (16 per loop)
• LED array to assist alignment
• Auto gain adjustment allowing 1 man commissioning

Beam Receiver
• Loop Powered (16 per loop)
• 100m beam transmission
• Improved immunity to EMC & dust build up on the lens

KEY FEATURES
• S-Quad Beam pairs
are loop powered
supporting 16 pairs
per loop
• Each beam can be set
to one of 6 sensitivity
states to provide a
best fi t for individual
applications
• The beam provides
increased resilience to
interference from the
sun and other light
sources
• Remote key switch
provides test facility at
ground level without
the need to gain
access to beams
mounted in high areas
• The beam
incorporates an LED
array to indicate signal
strength allowing
accurate alignment
during one person
commissioning
• Optimum sensitivity is
maintained by
automatic gain setting
triggered at the beam
during alignment
• The optical lens
design is intended to
minimise build up of
dust to reduce the
maintenance and
cleaning required
• The S-Quad beam is
compatible with early
versions of the Vigilon
Beam using the
S-Quad programming
base avoiding the
need to upgrade to
latest control software.