Category
- Burglary Alarm System
- Cable
- Closed Circuit Television System (CCTV)
- Fire Equipment
- Pepper Spray Vault/ATM Protection System
- Personal Security
- Physical Access Control
- Promotions
Popular
- Gent Fire Alarm System Set of Keys for Key Switch Interface and MCP
- Gent Fire Alarm Vigilon Manual Call Point with Glass Element and Protective Cover (Excludes Back Box)
- Cutting-Edge Velocity Zeta Aspiration Smoke Detection Fire Alarm Panel
-
GENT ADDRESSABLE FIRE ALARM 1 TO 6 LOOP CONTROL PANEL
₦6,250,000.00Original price was: ₦6,250,000.00.₦6,170,000.00Current price is: ₦6,170,000.00. -
TEXECOM VERITAS IMPAQ E BURGLAR ALARM VIBRATION DETECTOR- WHITE
₦22,000.00Original price was: ₦22,000.00.₦18,500.00Current price is: ₦18,500.00. -
PAXTON ACCESS CONTROL NET2 PLUS 1 DOOR CONTROLLER – POE+, PLASTIC CABINET
₦462,000.00Original price was: ₦462,000.00.₦458,000.00Current price is: ₦458,000.00. -
Concept Handheld Metal Detector with Vibration Function
₦20,000.00Original price was: ₦20,000.00.₦19,000.00Current price is: ₦19,000.00. -
Fisher Research Labs M-scope Walk-Through Metal Detector
₦4,600,000.00Original price was: ₦4,600,000.00.₦4,500,000.00Current price is: ₦4,500,000.00. -
CONCEPT (Burglar Alarm) WIRELESS SIGNAL REPEATER
₦23,500.00Original price was: ₦23,500.00.₦21,500.00Current price is: ₦21,500.00. -
CONCEPT (Fire Alarm) TUYA WIFI SMOKE DETECTOR
₦13,000.00Original price was: ₦13,000.00.₦11,000.00Current price is: ₦11,000.00.
Gent Fire Alarm XENS-850 Flush Manual Call Point 470 Ohms Glass
₦23,000.00 Original price was: ₦23,000.00.₦21,000.00Current price is: ₦21,000.00.
Gent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Gent XENS-850 Flush Manual Call Point 470 Ohms Glass
Gent conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.
Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.
With the addition of a hinged transparent cover the element may be protected against accidental operation.
A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.
Key Features
- Fully compliant with EN54, Part 11
- Re-settable operating element option
- 470 Ohm resistor and Normally Open contact complete with glass
- Resistive and clean contact connections
-
Technical Data Current Rating 2A (switching only) Dimensions Height 93mm – Width 89 Humidity 93+ 3% non-condensing Ingress Protection IP24D Operating Temperature -10°C to +55°C Operating Voltage 30VDC maximum Weight 180g (130g Semi- flush)
Related products
-
Out of Stock
Apollo Addressable Fire Alarm E-Z Fit Base – 6″ Ultra-Low Profile Detector Mount
Read more- Four-wire base
- Detector locking mechanism
- One way fit
- Easy to wire
- Contains a ground wire terminal
-
Out of Stock
APOLLO Addressable Fire ALarm ISOLATOR
Read moreThe Isolator is placed at intervals on the loop and ensures that, in the case of a short circuit, only the section between the isolators will be affected. When the short circuit is removed, the isolators automatically restore power and data to the isolated section.
- Detects wiring short-circuits using patented technology
- Minimizes disruption from short-circuits
- Automatic de-isolation on short-circuit removal
- Up to 20 devices may be installed between isolators
-
Out of Stock
Gent by Honeywell Fire Alarm Conversion Kit For VIG-NODE-24 EN 54 to BS V3+ Functionality (VIG-BSKIT-NODE)
Read moreGent VIG-BSKIT-NODE Conversion Kit
The VIG-BSKIT-NODE Conversion Kit for is designed for use with the VIG1-24 EN 54 to BS V3+ Functionality (Replaces VIG1-V3+) Loop Only.
Please Note: The BS or V3+ variants of Vigilon are no longer available. VIG-NODE-24 (EN54 version) panels may be converted to BS protocol using the conversion kit VIG-BSKIT-NODE.
-
Out of Stock
Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface Technology
Read moreUpgrade your fire safety system with the Gent Vigilon Single Channel Mains Switching Interface with Enclosure – S4-34401. Engineered for seamless integration with the Vigilon system, this interface unit delivers heavy-duty relay switching for both 24V and 230V applications. Dive into the details of this cutting-edge product designed to elevate your building controls and damper …
Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface TechnologyRead More
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Safe and Secured Payment
On all order over
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.