Category: Sounder, Voice Sounder & VADs

Showing 1–16 of 44 results

wishlist

AH (Fire Alarm)-03127-S Electronic Sounder

General This electronic sounder is designed for use with fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides and audio-visual warning with is suitable for places where high sound output and visual indication is required. Characteristics EN54-3 Approval Type B Sounder 32 signal tones selectable by Dip switch. High …

AH (Fire Alarm)-03127-S Electronic SounderRead More

Read more
wishlist

AH-03127-BS Electronic Sounder and Beacon

General This electronic sounder is designed for use with fire alarm systems, security systems and industrial signaling systems. Combined sounder and beacon provides and audio-visual warning with is suitable for places where high sound output and visual indication is required. Characteristics EN54-3 Approval Type B Sonder Beacon 32 signal tones selectable by Dip switch. …

AH-03127-BS Electronic Sounder and BeaconRead More

Read more
wishlist

Apollo (Fire Alarm) AlarmSense Base Sounder/Visual Indicator Part No. 45681-509APO
Will accept any AlarmSense fire detector to provide fire detection and an audible AND visual alarm warning signal at the same point.

70d-87dB(A) sound output (visual indicator activates with sounder).

Certified to EN54-3 by UL International (UK) Limited.

Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.

AlarmSense priority/non priority signal recognition

Detects the removal of a detector head and reports a fault

Continues to work during unauthorised removal of detector.

High and low volume ranges.

Red and white caps available for stand-alone use.

Can also be purchased as part of a detector/sounder visual indicator base combination (see Combination AlarmSense Devices section below).

Download datasheet
Read more
Sale!

wishlist

Apollo (Fire Alarm) AlarmSense Open Area Sounder IP65
Original price was: ₦55,000.00.Current price is: ₦49,500.00.

AlarmSense Open Area Sounder IP65 Part No. 55000-018APO A powerful wall-mounting open-area Sounder suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. IP65 rated. Up to 99dB(A) sound output at 1m. Device locking facility. Max. five Open-Area Alarm Devices per AlarmSense zone. Supply wiring 2-wire monitored, polarity insensitive. Supply/operating voltage 18-33VDC …

Apollo (Fire Alarm) AlarmSense Open Area Sounder IP65Read More

Read more
wishlist

Apollo (Fire Alarm) AlarmSense Open Area Sounder/Visual Indicator

AlarmSense Open Area Sounder/Visual Indicator Part No. 55000-017APO A powerful wall-mounting open-area Sounder/Visual Indicator suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels. IP65 rated. Up to 99dB(A) sound output at 1m. Ultra-bright red LED. Device locking facility. Max. five Open-Area Alarm Devices per AlarmSense zone. Download datasheet Flash rate & …

Apollo (Fire Alarm) AlarmSense Open Area Sounder/Visual IndicatorRead More

Read more
wishlist

APOLLO Addressable Fire Alarm DISCOVERY UL OPEN-AREA SOUNDER VID – RED BODY (RED FLASH)
Discovery UL Open-Area Sounder Visual Indicator with red body and red flash.

UL 464 Certified

15 Pairs of Tones (EN54-3 Sounder)

7 Volume Levels

Visual Indicator Beacon (Red-Flash)

Discovery (works on XP95 & CoreProtocol)
Read more
wishlist

APOLLO ADDRESSABLE FIRE ALARM XP95 OPEN-AREA VID – RED BODY (RED FLASH) – ISOLATING 55000-009APO
The XP95 Open-Area VID is a local-area visual indicator designed for indoor use. The visual indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.

High intensity LEDs

More reliable than xenon visual indicators

Automatic LED check

Lockable

Wide angle of visibility

Enables DDA compliance

Synchronised flash

Can be used with Discovery or XP95
Read more
wishlist

APOLLO Addressable Fire Alarm XP95A OPEN-AREA SOUNDER – RED BODY – ISOLATING
The XP95A Open-Area Sounder has been designed for use in open areas and can be connected to any Discovery UL or XP95A system.

For use with XP95A and Discovery UL systems

Self-test fault monitoring

Two volume settings 92dB(A) and 100dB(a)

Built in isolator

Synchronisation of tones

Individual and group addressing

Red or white options

Loop powered

IP65 rated
Read more
wishlist

Apollo(Fire Alarm) AlarmSense Base Sounder Part No. 45681-510APO
Will accept any AlarmSense fire detector to provide fire detection and an audible alarm warning signal at the same point.

70d-87dB(A) sound output.

Certified to EN54-3 by UL International (UK) Limited.

Suitable for use with C-TEC’s CFP AlarmSense range of 2-8 Zone Two-Wire Fire Panels.

AlarmSense priority/non priority signal recognition

Detects the removal of a detector head and reports a fault

Continues to work during unauthorised removal of detector.

High and low volume ranges

Red and white caps available for stand-alone use.

Can also be purchased as part of a detector/sounder base combination (see Combination AlarmSense Devices section below).

Download datasheet
Read more
wishlist

C-tec Fire Alarm ActiV 96dB(A) Conventional Base Sounder Part No. BF431C/CC/W
Third-party certified to EN54-3 (Sounders).

Impressive 96dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Alarm Current at 30Vdc = 5.5mA

Alarm Current at 18Vdc = 3.8mA

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
wishlist

C-tec Fire Alarm ActiV Conventional ‘C Class’ Base VAD c/w Voice Sounder Part No. BF457C/CC/W
Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
wishlist

C-tec Fire Alarm ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W
Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
Sale!

wishlist

C-TEC Fire Alarm ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (shallow base) Part No. BF433C/CC/SR
Original price was: ₦48,000.00.Current price is: ₦45,000.00.
Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).

Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as a W-4-4 VAD.

Impressive 100dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)

Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)

IP21C rated.

Manufactured in the UK by C-TEC.
Add to cart
wishlist

C-Tec Fire Alarm ActiV Conventional Hi-Output W-2.75-9 Wall VAD c/w Voice Sounder (deep base) Part No. BF447C/CC/DR
Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Can also be used as a W-4-4 VAD.

Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

IP33C rated.

Manufactured in the UK by C-TEC.

Download datasheet
Read more
wishlist

C-tec Fire Alarm ActiV Conventional Weatherproof Hi-Output W-2.75-9 Wall VAD c/w 100dB(A) Sounder (IP55) Part No. BF433C/CC/DR/65
Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).

Provides ‘W-2.75-9’ rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as W-4-4 VAD.

Impressive 100dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)

Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)

IP55C rated (weatherproof).

Manufactured in the UK by C-TEC.

Download datasheet
Read more
Sale!

wishlist

Concept (Burglar Alarm) WL-05 Flashing light
Original price was: ₦6,000.00.Current price is: ₦5,000.00.

PACKAGE

1*flashing light

CTN details:
Depends on order qty

Add to cart

No items found.