Welcome to Safe Tech Hub

Category: Conventional Fire Alarm

Showing 97–112 of 156 results

  • Notifier Sounder Base Conventional NBS4

    0.00

    Non-Addressable Detector Base Sounder, 4 Tone, Suitable for fire detectors with 60mm mounting centres. approved to EN54-3.

    If required the SC085 (white) lid to be ordered separately.

    • 4 Tone Sounder
    • High sound output, low current consumption
    • High reliability and stable performance
    • Volume control
    • Lid accessory available to enable vertical installation
    • Designed and approved to EN54-3
    • Market specific tone set available

    Read more
  • Q01 EN Photoelectric Smoke Detector

    0.00
    • EN54-7 Approval.
    • The standard detector is 2-wire or 3-wire with base.
    • For 4-wire type just add one relay output module on 3-wire base. Simple and easy module placement enables wider application.
    • Dual LEDs for 360-degree visibility. Bi-color LED, Stand-by Status: Green; Alarm Status: Red.
    • Detector is made of high endurance, solid and colorfast Fire-proof plastic.
    • Non-loosening screws on base terminal for easy installation.
    • Detector has passed strict EMC test, which greatly eliminates false alarms caused by interference from nearby sources.
    Read more
  • QP112 1 zone Fire Alarm Conventional Control Panel

    0.00
    • Removable front board for easy maintenance.
    • Easy-to-clean front board is able to avoid dirt attached.
    • High luminance and long life span LED.
    • Independent visual & audible indication for zone open/short fault.
    • Independent visual & audible indication for AC power & battery fault.
    • Visual & audible indication for sounder short circuit fault.
    • Buzzer silence with 3-mode operation feature.
    • Accurate supervision circuit for battery.
    • Short circuit = Alarm feature ( selected by JUMPER applicable for manual call point w/o resistance).
    Read more
  • QP212 2 zone Fire Alarm Conventional Control Panel 

    0.00
    • Day/Night Mode Selection.
    • Ground fault detection feature.
    • Zone Output, Fault Output and Alarm Output (NO. NC. COM).
    • System will back to normal automatically after alarm status is released.
    • Removable front board for easy maintenance.
    • Easy-to-clean front board is able to avoid dirt attached.
    • High luminance and long life span LED.
    • Independent visual & audible indication for zone open/short fault.
    • Independent visual & audible indication for AC power & battery fault.
    • Visual & audible indication for sounder short circuit fault.
    • Buzzer silence with 3-mode operation feature.
    • Accurate supervision circuit for battery.
    Read more
  • QP412 4 Fire Alarm zone Conventional Control Panel

    0.00
    • Day/Night Mode Selection.
    • Ground fault detection feature.
    • 24V DC power output for external load.
    • Zone EOL resistor can be set from panel board.
    • Zone Output, Fault Output and Alarm Output (NO. NC. COM).
    • System will back to normal automatically after alarm status is released.
    • Removable front board for easy maintenance.
    • Easy-to-clean front board is able to avoid dirt attached.
    • High luminance and long life span LED.
    • Independent visual & audible indication for zone open/short fault.
    • Independent visual & audible indication for AC power & battery fault.
    • Visual & audible indication for sounder short circuit fault.
    • Buzzer silence with 3-mode operation feature.
    • Accurate supervision circuit for battery.

     

    Read more
  • Revolutionize Fire Detection with Gent S4-34741 Beam Sensor – Seamless Integration with Vigilon and Nano Panels!

    • Each beam can be set to one of 6 sensitivity states to provide a best fi t for individual applications
    • The beam provides increased resilience to interference from the sun and other light sources
    • Remote key switch provides test facility at ground level without the need to gain access to beams mounted in high areas
    • The beam incorporates an LED array to indicate signal strength allowing accurate alignment during one person commissioning
    • Optimum sensitivity is maintained by automatic gain setting triggered at the beam during alignment
    • The optical lens design is intended to minimise build up of dust to reduce the maintenance and cleaning required
    • The S-Quad beam is compatible with early versions of the Vigilon Beam using the S-Quad programming base avoiding the need to upgrade to latest control software
    Read more
  • SERIES 90 TO XP95 BASE ADAPTER 45681-238APO

    The Series 90 to XP95 Base Adaptor is designed to allow XP95 detectors to be fitted to an existing Series 90 base. The adaptor eliminates the need to rewire an existing Apollo intelligent system.

    • Allows an existing range to be updated with ease
    • Eliminates the need for re-wiring
    Read more
  • Solo 100-001- Fibreglass 4 Section Telescopic Pole – 4.5 metres

    Original price was: ₦685,000.00.Current price is: ₦675,000.00.
    • SOLO 100/108 Telescopic Poles
    • Exceptionally lightweight and very portable
    • Lock system as standard named “Totalock”
    • Non Conductive Material
    • Makes the job more efficient
    • Strong & Durable Fibreglass
    • Can be used with all SOLO tools and attachments
    • Use with tools up to 6 metres (Including Height of Man)
    • Add SOLO 101-001 Extension poles to reach 9 metres (Including Height of Man)
    Add to cart
  • Solo 110-001Fibreglass 4 Section Telescopic Pole – 1.75Metres

    Original price was: ₦620,000.00.Current price is: ₦617,000.00.

    The Solo 110 Access Pole offers safe access to detectors installed at heights of up to 3 metres. Solo 110-001 Extends to 1.75 metres to provide maximum reach of 3 metres Can be used with up to 3 Solo 111 extension poles Less disruption when testing Quicker movement between and around sites

    Add to cart
  • Solo 111-001 Fibreglass Extension Pole – 0.5 metres

    Original price was: ₦187,000.00.Current price is: ₦184,000.00.

    Solo 111 Urban 0.5m Extension Pole The Solo 111 Extension Pole is to be used to extend the height of the Solo 110 telescopic access pole. All Solo poles, made from toughened fiberglass, are: Light – very important when used at height, around site, day after day Non whip – even at height and when trying to insert …

    Solo 111-001 Fibreglass Extension Pole – 0.5 metresRead More

    Add to cart
  • Solo 200 – 001 -Universal Detector Removal Tool

    Original price was: ₦420,000.00.Current price is: ₦410,000.00.

    With the ability to create various size combinations, the Solo 200 universal detector removal tool is designed to suit the majority of smoke, CO and heat detectors for removal, inspection and replacement. The Solo tool has colour coded grips that simply twist into place and the universal joint allows the tool to remain parallel with …

    Solo 200 – 001 -Universal Detector Removal ToolRead More

    Add to cart
  • Solo 330 =001 Aerosol Smoke And CO Dispenser

    Original price was: ₦389,000.00.Current price is: ₦385,000.00.

    Solo 330 Aerosol Smoke and CO Dispenser The Solo 330 smoke/CO dispenser with it’s injection-moulded construction and swing frame, make it the ideal tool for testing virtually all types and makes of modern smoke detectors at heights of up to 9 metres (Using the SOLO100-001 Pole). Ergonomically designed for optimum use with the Solo Aerosol …

    Solo 330 =001 Aerosol Smoke And CO DispenserRead More

    Add to cart
  • Solo 330 Aerosol Smoke and CO Dispenser

    Original price was: ₦388,000.00.Current price is: ₦384,000.00.

    Solo 330 Aerosol Smoke and CO Dispenser The Solo 330 smoke/CO dispenser with it’s injection-moulded construction and swing frame, make it the ideal tool for testing virtually all types and makes of modern smoke detectors at heights of up to 9 metres (Using the SOLO100-001 Pole). Ergonomically designed for optimum use with the Solo Aerosol range, …

    Solo 330 Aerosol Smoke and CO DispenserRead More

    Add to cart
  • Solo 461-001 Cordless Heat Detector Test Kit

    Original price was: ₦1,120,000.00.Current price is: ₦1,100,000.00.
    • No cables / cords – powered from battery baton within pole
    • Infra-red beam is broken by detector to activate heat generation
    • Microprocessor control maintains constant heat and airflow
    • Universal design suits widest range of detectors
    • Battery powered
    • Transparent test cup for clear view of detector LED
    • Goes into standby after 120 seconds of use for protection
    • Switches off completely after 5 minutes in standby
    Add to cart
  • Solo 823-101 -Smoke & Cordless Heat Detector Test Set 9.3 Metres

    2,523,000.00

    Solo 823 Smoke & Cordless Heat Detector Test Set 9.3 metres Solo equipment is available in a number of conveniently arranged kits. Whether your need is for a simple starter kit, a universal smoke testing kit, or an all encompassing kit including a heat detector tester, there is one available. Larger kits are supplied with …

    Solo 823-101 -Smoke & Cordless Heat Detector Test Set 9.3 MetresRead More

    Add to cart
  • Solo A5 Smoke Detector Tester Aerosol 250ml (Flammable)

    25,500.00
    • Detector manufacturer approved.
    • Designed for use with Solo 330 dispenser.
    • Compliant with regulations.
    • UL certified.
    • Product Code: Solo A5-001.
    Add to cart
10
754,500.00