Welcome to Top Store

Category: Analog Fire Alarm System

Analog fire alarm system operate by receiving signal from single cable that connects all of the detection units. The systems interact with the control panels via a single continuous line that connects all equipment. It decreases the risk of wiring problems.

This increased trustworthiness ensures that no false alarms, unnecessary evacuations, or emergency procedures disrupt business operations. When an Analog fire system’s fire alarm goes off, residents can respond appropriately and without hesitation. The single wire connection feature has a number of  advantages for the maintenance and efficiency of the fire alarm system.

Adding or removing alarms throughout a facility, the singular wiring enables for smoother and faster installations. This helps to keep installation labor expenditures to a minimum.

Showing 1–16 of 141 results

  • Sale!

    AlarmSense Optical Smoke Detector

    Original price was: ₦ 25,000.00.Current price is: ₦ 23,000.00.

    AlarmSense Optical Smoke Detector – Reliable Fire Safety by Trends Ventures Limited

    Stay protected with the AlarmSense Optical Smoke Detector, built for fast, accurate smoke detection. Perfect for homes, offices, and commercial buildings, it integrates easily into AlarmSense two-wire systems for efficient installation.

    Key Features:

    • Fast response to slow-burning fires

    • Reduced false alarms

    • Compatible with AlarmSense control panels

    • Easy installation & low maintenance

    • LED status indicator for clear alerts

    Now available at Trends Ventures Limited – your trusted fire and safety partner.

    Add to cart Buy now
  • Sale!

    Analogue Addressable Manual Call Points- S4-84845

    Original price was: ₦ 80,000.00.Current price is: ₦ 75,000.00.

    KEY FEATURES

    • Resettable or breakglass
    • Lift up protective covers

    • Keyswitch
    • Weatherproof version (IP67) suitable for external areas
    • Up to 200 per loop
    • Integral short-circuit isolator
    • Surface or Semi Flush

    Add to cart Buy now
  • Sale!

    APOLLO XP95 OPTICAL SMOKE DETECTOR 55000-600APO

    Original price was: ₦ 56,000.00.Current price is: ₦ 55,000.00.

    Key Features:

    • Advanced optical smoke sensing technology

    • Reliable detection of smoldering fires

    • Compatible with XP95 and Discovery systems

    • LED status indicator for visual confirmation

    • Designed for low maintenance and long service life

    Add to cart Buy now
  • ECO1002-A

    Combination Optical / Thermal Smoke Sensor (58 °C) (ECO1002-A)

    Features
    • Low profile design
    • Low current draw
    • Automatic drift compensation
    • Operates on 12 and 24VDC Systems
    • Remote alarm test feature
    • Easy maintenance
    • Remote LED Option
    • Approved to EN54-7:2000 (Amendment 1)
    • EN54-5:2000 (Amendment 1) Class A1R; CEA 4021
    • Extended warranty
    Read more
  • FS20X-211-24-6: Dual IR/UV Flame Detector (Stainless Steel)

    Based on the foundation of the highly successful and reliable SS4 detector, the FS20X detector represents a quantum leap
    in integrating Infrared and Ultraviolet sensing technologies. The FS20X detector is a Multi-Spectrum and UV/Dual IR/VIS
    and flame detector with a proven UV solar-blind sensor. FS20X delivers a faster response and fewer false alarms, performs in
    a wider ambient temperature range, with a much longer detection range compared to conventional UV/IR detectors.

    Read more
  • VCS CABLES SPARE RIBBON

    Gent Spare Ribbon Cable Set for Compact Panel (VCS-CABLES)

    DESCRIPTION

    The VCS-CABLES from Gent is a Spare Ribbon Cable set for Compact Panel Analogue Addressable Fire Alarm Panel.

    Read more
  • Honeywell Gent (VS-PROLL) Printer Roll For Vig and 34000

    Gent (VS-PROLL) Printer Roll For Vig and 34000

     16,000.00

    Honeywell Gent (VS-PROLL) Printer Roll For Vig and 34000

    The Gent VS-PROLL is a Printer Roll For Vig and 34000.

    Add to cart Buy now
  • Sale! Gent 013610 Basic Winmag Licenses

    Gent 013610 Basic Winmag Licenses

    Original price was: ₦ 2,200,000.00.Current price is: ₦ 1,917,000.00.

    WINMAGplus has been specially developed to meet the requirements of managing and integrating hazard detection systems on a single PC platform. WINMAGplus simultaneously manages and displays graphically a number of security applications, using a common user interface including: fire detection technology; voice alarm public address; intrusion detection technology; access control technology; video technology; rescue route technology/escape door control, personnel protection systems and locating systems as well as fence monitoring systems.

    Add to cart Buy now
  • Gent 14111-99 1102 Round Call Point Glass

    Gent 14111-99 1102 Round Call Point Glass

    1411-99 from Gent is a pack of 10 Round Call Point Glasses which are are 65mm diameters x 1mm thick.

    They are recommended for use with the Gent 1102 rectangular call points. These glasses do not have an anti-shatter film as they are recommended to be broken with the small hammer attached to call points.

    Read more
  • Gent 14112-10 Call Point Test Key

    Gent 14112-10 Call Point Test Key

    The 14112-10 is a replacement Test Key designed for older style Gent Manual Call Points.

    Read more
  • Gent 14112-49EN Hinge Cover with Drilled Front Moulding

    Gent 14112-49EN Hinge Cover with Drilled Front Moulding

    Manual call points are manufactured from ABS with plastic covered push break glasses for safe and simple operation. No hammer is required. A polycarbonate cover version is available for applications susceptible to inadvertent operation, such as sports halls.

    Read more
  • 14115-KEY

    Gent 14115-KEY Spare Bulgin Key – Pack of 10

    Gent 14115-KEY Spare Bulgin Key – Pack of 10

    A spare Bulgin Key for 14115-08 key operated (pack of 10).

    For use with Bulgin Key Switches (SM0319, SM0320, SM0324) and Gent key operated call points.

    Bulgin keyswitches were used on the following older Gent Fire Alarm Panels for enable/disable functions:

    • Fire Alarm Model 3225
    • Fire Alarm Model 3226
    • Fire Alarm Model 3228
    • Fire Alarm Model 3280
    Read more
  • Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

    Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

     120,000.00

    Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

    The 19104-52 is a DIN rail mounting polarised relay designed for use with the S4-34440-02 and S4-34440-12 interface units.

    Add to cart Buy now
  • Gent 34701 Series T Breaker

    Gent 34701Series T Breaker(34701)

     70,000.00

    Gent 34701 34000 Series T Breaker

    The 34701 T-Breaker Unit allows a spur to be created from a Gent analogue addressable loop circuit.

    Add to cart Buy now
  • white ring

    Gent 4″ trim ring and snap-in mounting clips for IQ8Quad detector base (805574)

    Snap-in mounting clips and trim ring for base installation, e.g. for installation on 4” electrical boxes.
    Take note, the label plate

    Read more
  • Gent 781814 Conventional Remote LED

    Gent 781814 Conventional Remote LED

    Gent 781814 Conventional Remote LED Manufactured by Gent, the Conventional Remote LED 781814 is part of the new ES detect range and has been developed to work in conjunction with any Xenex Panels Red prism is continuously or pulsed illuminated by 3 LEDs. Connection by 2-wire cable to detector base. Key Features 3 continuously or …

    Gent 781814 Conventional Remote LEDRead More

    Read more
Select your currency
NGN Nigerian naira
Shopping cart2
-
+
-
+
Subtotal
 87,000.00
Total
 90,000.00
Continue shopping
2
2
 87,000.00