Popular
C-TEC 24V BS 5446-3 Vibrating Pillow Pad Part No. BF320
- Can be used in conjunction with a BF320JP connection plate to warn the hearing impaired of a potential fire alarm or evacuation alert condition.
- Vibrates and pulses on and off when triggered as per the requirements of BS 5446-3 (2015).
- Designed to be placed under a pillow to supplement the audible and/or visual indication alerts provided by a system’s sounders and/or VADs.
- Wide 10-30V DC voltage range means it can also be connected to many third-party connector plates (subject to testing).
- Includes a 2m connection lead with a locking mini-XLR connector to prevent accidental removal.
- Includes a 6K8 end-of-line monitoring resistor for fire alarm system use – see instructions for monitoring options on other systems.
-
Approvals/certifications Complies with the requirements of BS 5446-3. Application/operation Designed to connect to a BF320JP connection plate. The pad is typically placed under a pillow to warn the hard of hearing of an emergency situation. Supply/operating voltage 10V-30V via BF320JP plate. Activation current 65mA @ 24V DC / 110mA @ 10V DC. Product dimensions (mm) 100mm diameter x D 34mm; Connection lead measures 2m. Construction & finish PC White RAL90003 Weight 162g Operating conditions/temperature -10ºC to +60ºC. Notes The responsible person must ensure the pad’s location is satisfactory to wake the user when in alarm. Note that on a C-TEC Evac-Alert System, power should be derived from a mains powered CA737 Four Way flat Interface Unit.
Related products
-
Texecom EXD Buzzer TCA-0005
Read moreEXD Buzzer
The Exd Buzzer is an explosion proof buzzer designed
for use in hazardous areas where a distinctive signal is
required. Certified to ATEX II 2G Exd e IIC T6, it is suitable for
use in Zone 1 and Zone 2 areas.
Producing a tone with low frequency, it cuts through
background noise more effectively than many other
devices of a similar output.
Mounted in a rugged reinforced polyester case and
weatherproof to IP66, it is suitable for use in the most
arduous conditions. -
C-TEC ActiV 96dB(A) Conventional Base Sounder Part No. BF431C/CC/W
Read more-
- Third-party certified to EN54-3 (Sounders).
- Impressive 96dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA
- Alarm Current at 18Vdc = 3.8mA
- Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.
- Supplied with a BF431QCP quick connect plate and detector spur wires.
- IP21C rated.
-
-
Zeta Fyreye MkII Conventional Heat Detectors MKII-HF C/W Base
₦15,000.00Add to cartDESCRIPTION
The Fyreye fixed heat detector (MKII-HF) has a
single thermistor arrangement that gives an alarm at a
temperature of 57°C.
There are 4 types of mounting base available; standard
or deep and with or without diode. -
C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (shallow base) Part No. BF430C/CC/SR
Read more- Third-party certified to EN54-3 (Sounders).
- Impressive 100dB(A) sound output @ 1m.
- Includes 31 selectable primary tones and an optional secondary tone.
- Two volume levels (high and low)
- Alarm Current at 30Vdc = 5.5mA.
- Alarm Current at 18Vdc =Â 3.8mA.
- IP21C rated.
- Manufactured in the UK by C-TEC.
Know Us
Safetech.hub is the newest online platform envisioned to provide 24/7 online platform for integrators, installers, and end users of Extra Low Voltage (ELV) systems in Nigeria
Read More
Reviews
There are no reviews yet.