Shop - Page 14 of 46 - Safetechub.com
Welcome to Top Store

Cart

Your Cart is Empty

Back To Shop

Archives: Shop

Showing 209–224 of 727 results

  • Gent 14112-10 Call Point Test Key

    Gent 14112-10 Call Point Test Key

    The 14112-10 is a replacement Test Key designed for older style Gent Manual Call Points.

    Read more
  • Gent 14112-49EN Hinge Cover with Drilled Front Moulding

    Gent 14112-49EN Hinge Cover with Drilled Front Moulding

    Manual call points are manufactured from ABS with plastic covered push break glasses for safe and simple operation. No hammer is required. A polycarbonate cover version is available for applications susceptible to inadvertent operation, such as sports halls.

    Read more
  • 14115-KEY

    Gent 14115-KEY Spare Bulgin Key – Pack of 10

    Gent 14115-KEY Spare Bulgin Key – Pack of 10

    A spare Bulgin Key for 14115-08 key operated (pack of 10).

    For use with Bulgin Key Switches (SM0319, SM0320, SM0324) and Gent key operated call points.

    Bulgin keyswitches were used on the following older Gent Fire Alarm Panels for enable/disable functions:

    • Fire Alarm Model 3225
    • Fire Alarm Model 3226
    • Fire Alarm Model 3228
    • Fire Alarm Model 3280
    Read more
  • Placeholder

    Gent 17800-02 Detector Base Without Diode – Flush Cabling

     1,500.00

    Manufacturer : Gent by Honeywell Part Number : 17800-02 Conventional Detector Base Low Profile Designed for Flush Cabling Without Head Removal Monitoring Diode For Use With The Gent 7800 Series Range of Detectors

    Add to cart Buy now
  • Placeholder

    Gent 17801-01 Base without diode for Surface cable

     1,500.00

    The Gent 17800-01 Detector Base is designed for use with the Gent 7800 Series of conventional fire alarm detectors. The Gent 17800-01 Detector Base is designed for surface cabling. The Gent 17800-01 Detector Base does not have a head removal diode

    Add to cart Buy now
  • Placeholder

    Gent 17801-01 Surface Mount Base with Dual Diodes

    • Key Features
      • Common to all Gent series detectors
      • Automatic locking option
      • Head out continuity monitoring
      • Easy to install
    Read more
  • Gent 17840-01 Optical Smoke Detector

     9,000.00
    • Low profile design
    • Low current draw
    • Remote alarm test feature
    • Easy maintenance
    • Remote LED option
    • Designed to comply with EN54 Pt5:2000
    Add to cart Buy now
  • Gent 17850-01 Fixed Temperature Heat Detector

     11,000.00
    • Low profile design
    • Low current draw
    • Remote alarm test feature
    • Easy maintenance
    • Remote LED option
    • Designed to comply with EN54 Pt5:2000
    Add to cart Buy now
  • Gent 17860-01 Rate Of Rise Heat Detector

     11,000.00
    • Low profile design
    • Low current draw
    • Remote alarm test feature
    • Easy maintenance
    • Remote LED option
    • Designed to comply with EN54 Pt5:2000
    Add to cart Buy now
  • Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

    Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

     120,000.00

    Gent 19104-52 Din Rail Mounting Polarised Relay for Mounting Inside the Interface

    The 19104-52 is a DIN rail mounting polarised relay designed for use with the S4-34440-02 and S4-34440-12 interface units.

    Add to cart Buy now
  • Gent 2.8M Venturi Tube

    Gent 2.8M Venturi Tube for Duct Housing (S4-34760-28)

    The S4-34760-28 from Gent is a 2.8 Venturi Tube for use with Duct Smoke Sensors. This device shall employ a molded plastic housing with a clear viewing window and metal probes (Gent 2.8M Venturi Tube) to pick up smoke in ventilation ducts. The housing shall provide a smoke entry test point and an airflow indication. Depending on the risk and sensitivity levels required, the sensor to be fitted shall be selected from the full range of sensors available and not factory fitted. This unit is particularly suitable for sensing smoke particles in ducting which is likely to be in large quantity and flowing fairly quickly.

    Read more
  • Gent 34701 Series T Breaker

    Gent 34701Series T Breaker(34701)

     70,000.00

    Gent 34701 34000 Series T Breaker

    The 34701 T-Breaker Unit allows a spur to be created from a Gent analogue addressable loop circuit.

    Add to cart Buy now
  • Gent 34740 Angle Bracket and Base (S4-34741-01)

     150,000.00

    The Gent 34740 Angle Bracket and Base is designed for use in areas where the S4-34740 beam detector will not be installed on a vertical surface, or where the beam path is not perpendicular to the installation surface. It is supplied with a pre-installed S-Quad base.

    Gent’s S-Quad Beam Sensors provide an enhanced solution for linear beam detection for applications where point detection is neither practical nor economical. Powered and controlled via the loop, the beam is a market-leading device with features such as ‘one man alignment and commissioning, which is achieved using the auto gain setting. This ensures the optimum alignment is reached. Maintenance of the beam is enhanced with a key-operated test feature that simulates the beam’s obscuration in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 1.

    Key Features
    Add to cart Buy now
  • Gent 34740 Parallel Bracket and Base

    Gent 34740 Parallel Bracket and Base (S4-34741-03 )

     150,000.00

    The Gent 34740 Parallel Bracket and Base is a Parallel Bracket and Base for standard applications adjustable to + / – 15°.

    Gent’s S-Quad Beam Sensors provide an enhanced solution for linear beam detection for applications where point detection is neither practical nor economical. Powered and controlled via the loop, the beam is a market-leading device with features such as ‘one man alignment and commissioning’ which is achieved using the auto gain setting, this ensures the optimum alignment is reached. Maintenance of the beam is enhanced with a key-operated test feature that simulates the beam’s obscuration in a fire. The Gent loop powered beam is certified to EN54 parts 12 and 1.

    Add to cart Buy now
  • Gent 4 Channel Interface

    Gent 4 Channel Interface I/O (PCB Only) (S4-34450 )

     95,000.00

    Gent 4 Channel Interface I/O (PCB Only) 

    The Gent 4 Channel Interface is a loop powered interface designed for use with the Vigilon range of fire alarm system control panels.  This interface unit features 4 input / output channels that can be used to control services within a building.

    Interfaces are used to link the fire alarm system to other plant management devices such as sprinklers and security systems. They can also be used to link to a zone of conventional detectors.

    Add to cart Buy now
  • Sale! Gent 4-ZONE CONVENTIONAL PANEL

    Gent 4 ZONE CONVENTIONAL PANEL, EN54 LESS BATTERIES (13270-04LB)

    Original price was: ₦ 259,000.00.Current price is: ₦ 235,500.00.

    DESCRIPTION

    Gent 13270-04LB 4 Zone Conventional Xenex Fire Panel

    BSI approved to EN54: Parts 2 & 4, the Xenex control panel can be used on installations meeting BS 5839:Part1. Control panel options for 2-8 zones can be specified.

    Designed to simplify system installation, each Xenex panel contains an integral power supply and battery support to drive up to 8 alarm sounder circuits, 2 auxiliary relay contacts, a zone disablement facility and also one-man test and commissioning features.

    Add to cart Buy now
Select your currency
NGN Nigerian naira
Shopping cart0
There are no products in the cart!
Continue shopping
0

Cart

Your Cart is Empty

Back To Shop