Archives: Shop

Showing 49–64 of 727 results

APOLLO XPERT 7 BASE – HEATED 45681-219APO
The base is designed to be used in cold climates where environmental conditions could result in either icing or condensation affecting the operation of detectors.

Raises the ambient temperature of a detector chamber by approximately 10°C

Limits the risks or potential for losses of functionality of detectors installed in cold conditions.
Read more
APOLLO XPERT 7 BASE 45681-210APO
The XPERT 7 Base is a low insertion force base with stainless steel contacts allowing easy and quick installation.

XPERT addressing

XPERT cards supplied with all bases

Locking feature to prevent unauthorised detector removal

Ideal for the XP95 and Discovery detector ranges
Read more
Attached iron gate sensor

Description Specifications Working distance ≥35mm Working voltage ≤100V Working current ≤500mA Contact mode NC/NO Case material Iron

Read more
Barrier Interface Unit (for use with intrinsically safe detectors)
Compatible with all C-TEC manufactured conventional fire alarm panels.

Allows a zone of up to 10 intrinsically safe detectors and any number of manual call points to be used in hazardous environments such as gas plants.

Open and short circuit wiring faults on the hazardous side of the barrier shown as open circuit faults at the fire panel.
Read more
C-TEC 12V 2A EN54-4 Switch Mode PSU Part No. BF560-12
A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts.

Includes a single-pole voltfree changeover relay that switches for any fault condition.

Multiple indicators – supply present, general fault, fault type & aux. equipment fault.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Ideal for connecting to 12V security STUs to provide BS5839-1 compliant remote monitoring facilities.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

BF560-12/E Encased PCB version also available.

Certified to EN54-4/A2 by the LPCB & VdS (AFNOR pending).

Download datasheet
Read more
C-TEC 12V 2A Encased Switch Mode PSU to EN54-4/A2 Part No. BF560-12/E
A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).

Includes the same electronics as our BF560-12 LPCB certified EN54-4/A2 boxed 12V 2A PSU.

Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.

Includes a single-pole voltfree changeover relay that switches for any fault condition.

Includes a fault type & hazardous voltages present LED.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

Download datashee
Read more
C-TEC 24V 1.2Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC283/2
A high-quality 24V 1.2Ah Valve Regulated Sealed Lead Acid battery pack.

Comprises 2 x 12V rechargeable batteries and a link wire.

Each battery measures 97 W x 50 H x 43 D mm.

Quick connect 4.75mm ‘Faston’ type terminals.

Download datasheet
Read more
C-TEC 24V 1.5A EN54-4 Switch Mode PSU Part No. BF560-24
Certified to EN54-4/A2 by the LPCB and VdS (AFNOR pending).

A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts.

Includes a single-pole voltfree changeover relay that switches for any fault condition.

Multiple indicators – supply present, general fault, fault type & aux. equipment fault.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

BF560-24/E caged & BF560-24/C PCB-only versions available.

Download datasheet
Read more
C-TEC 24V 1.5A EN54-4 Switch Mode PSU Part No. BF562-1
Certified to EN54-4/A2 by the LPCB and VdS.

A powerful switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts.

Includes a single-pole voltfree changeover relay that switches for any fault condition.

Multiple indicators – supply present, general fault, fault type & aux. equipment fault.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

BF562-1/E Encased PCB version available.

Download datasheet
Read more
C-TEC 24V 1.5A Encased Switch Mode PSU to EN54-4/A2 Part No. BF560-24/E
A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).

Includes the same electronics as our BF560-24 LPCB certified EN54-4/A2 boxed 24V 1.5A PSU.

Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.

Includes a single-pole volt-free changeover relay that switches for any fault condition.

Includes a fault type & hazardous voltages present LED.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

Download datasheet
Read more
C-TEC 24V 2.3Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC284/2
A high-quality 24V 2.3Ah Valve Regulated Sealed Lead Acid battery pack.

Comprises 2 x 12V rechargeable batteries and a link wire.

Each battery measures 178 W x 66H x 35 D mm.

Quick connect 4.75mm ‘Faston’ type terminals.

Download datasheet
Read more
C-TEC 24V 250mA Door Release Power Supply Unit c/w detector circuit Part No. BF375PE
A compact double gang Mains derived power supply c/w a conventional fire detector circuit.

Designed to provide power to up to 5 x 50mA 24V DC electromagnetic door retainers.

When used with two x ActiV fire detectors allows a cost-effective ‘stand-alone’ automatic door release system to be built (pre-packed BF375PEK kits are available).

Maximum PSU output is 250mA.

Trigger Release and fault monitored Zone Trigger inputs facilitate straightforward connection to fire alarm detectors, control panels, building management systems, timers, relays and other ancillary equipment.

Includes a manual release button, a Mains On and an Output Triggered indicator.

Can be mounted on a standard 25mm UK double gang flush or surface back box.

The BF375PE is also available as part of our BF375PEK automatic door release system kit which includes 1 x BF375PE, 2 x ActiV fire detectors, 2 x ActiV detector bases and 1 x electromagnetic door retainer.

Download datasheet
Read more
C-TEC 24V 2A Unregulated Door Release PSU Part No. BF377
A boxed door release power supply unit designed to provide DC power to 24V DC electromagnetic door retainers.

Can be controlled automatically from a fire alarm control panel or manual release keyswitch.

2A max. output.

Includes Mains On and Output Triggered indicators

No battery back up facility.

Download datasheet
Read more
C-TEC 24V 3.2Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC285/2
A high-quality 24V 3.2Ah Valve Regulated Sealed Lead Acid battery pack.

Comprises 2 x 12V rechargeable batteries and a link wire.

Each battery measures 135 W x 67 H x 67 D mm.

Quick connect 4.75mm ‘Faston’ type terminals.

Download datasheet
Read more
C-TEC 24V 3A EN54-4 Switch Mode PSU Part No. BF562-3
Certified to EN54-4/A2 by the LPCB and VdS.

A powerful 24V 3A switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts.

Includes a single-pole voltfree changeover relay that switches for any fault condition.

Multiple indicators – supply present, general fault, fault type & aux. equipment fault.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

BF562-3/E encased version also available.

Download datasheet
Read more
C-TEC 24V 3A Encased Switch Mode PSU to EN54-4/A2 Part No. BF562-3/E
A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).

Includes the same electronics as our BF562-3 LPCB/VDS certified EN54-4/A2 boxed 24V 3A PSU.

Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.

Includes a single-pole volt-free changeover relay that switches for any fault condition.

Includes a fault type & hazardous voltages present LED.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

Download datasheet
Read more

No items found.