Archives: Shop

Showing 65–80 of 727 results

C-TEC 24V 5A EN54-4 Switch Mode PSU Part No. BF562-5
Certified to EN54-4/A2 by the LPCB and VdS.

A powerful 24V 5A switch mode/digital hybrid PSU that can be customised* to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts.

Includes a single-pole voltfree changeover relay that switches for any fault condition.

Multiple indicators – supply present, general fault, fault type & aux. equipment fault.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

BF562-5/E encased version also available.

Download datasheet
Read more
C-TEC 24V 5A Encased Switch Mode PSU to EN54-4/A2 Part No. BF562-5/E
A powerful switch mode/digital hybrid PSU that can be customised to suit your exact requirements – see More Information tab for details.

Plastic cover on PSU PCB guards against touching live parts (to VDE 0100-410).

Includes the same electronics as our BF562-5 LPCB/VDS certified EN54-4/A2 boxed 24V 5A PSU.

Metal base plate facilitates straightforward mounting inside third-party OEM enclosures.

Includes a single-pole volt-free changeover relay that switches for any fault condition.

Includes a fault type & hazardous voltages present LED.

Two selectable battery charge currents.

Battery fault impedance limits can be optimised to suit load current (helps extend battery life)*.

Mains fail simulation mode.

Improved on-board temperature sensor with optional remote sensor.

Electronic functions comply with EN50131-6 grades 1-4 for security applications.

Download datasheet
Read more
C-TEC 24V 5A Relay On A Plate Part No. BF376
A general purpose, double-pole, polarised 24V 5A relay designed for use in 24V fire alarm systems.

Incorporates a high intensity LED which illuminates red when the relay is active.

Can be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets, rollershutter doors, etc.

Can be mounted on 25mm flush or surface mount back boxes.

Download datasheet
Read more
C-TEC 24V 7.0Ah VRLA battery pack (2 x 12V c/w link wire) Part No. BC286/2
A high-quality 24V 7.0Ah Valve Regulated Sealed Lead Acid battery pack.

Comprises 2 x 12V rechargeable batteries and a link wire.

Each battery measures 151 W x 98 H x 65 D mm.

Quick connect 4.75mm ‘Faston’ type terminals.

Download datasheet
Read more
C-TEC 24V BS 5446-3 Vibrating Pillow Pad Part No. BF320
Can be used in conjunction with a BF320JP connection plate to warn the hearing impaired of a potential fire alarm or evacuation alert condition.

Vibrates and pulses on and off when triggered as per the requirements of BS 5446-3 (2015).

Designed to be placed under a pillow to supplement the audible and/or visual indication alerts provided by a system’s sounders and/or VADs.

Wide 10-30V DC voltage range means it can also be connected to many third-party connector plates (subject to testing).

Includes a 2m connection lead with a locking mini-XLR connector to prevent accidental removal.

Includes a 6K8 end-of-line monitoring resistor for fire alarm system use – see instructions for monitoring options on other systems.

Download datasheet
Read more
C-TEC 24V Polarised Fire Bell Part No. BF336
A tough durable red fire bell.

Widely used in schools and other establishments for signalling ‘class’ or ‘shift’ changes.

Designed for internal use only.

152mm (6 inch) x 60mm

Incorporates highly efficient rotary centrifugal movements to provide a high sound output of up 95dB.

Low current consumption.

Includes a multi-fixing base plate.
Read more
C-TEC 24V Red Polarised Fire Bell Part No. BF336C
A robust red fire bell certified to EN54-3 by the LPCB.

Designed for internal use only.

152mm (6 inch) x 56mm

Up to 97dB sound output.

Wide 19-27V DC operating range.

Low current consumption.

Includes a multi-fixing base plate.
Read more
C-TEC 4 Zone Sounder Circuit Extender Kit Part No. FF502P
Provides four extra conventional sounder circuits with open and short circuit fault monitoring.

Compatible with most manufacturers’ fire alarm control panels.

Supplied on a double gang plate.

Basic connection requires four wires: 24 VDC, 0V, Sounder –Ve & Sounder +Ve.

Sounder -Ve & Sounder +Ve can be connected at the host panel or any convenient point on a sounder circuit (DO NOT SPUR). 24 VDC and 0V can be derived from the host panel or, alternatively, from an external PSU.

If connecting the FF502P to a C-TEC fire panel only three input control wires are required (Sounder -Ve is not required as our conventional panels have a common 0V rail).

Fits on standard UK 25mm flush or surface mount back boxes.

Download datasheet
Read more
C-TEC ActiV 96dB(A) Conventional Base Sounder Part No. BF431C/CC/W
Third-party certified to EN54-3 (Sounders).

Impressive 96dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Alarm Current at 30Vdc = 5.5mA

Alarm Current at 18Vdc = 3.8mA

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
C-TEC ActiV Conventional ‘C Class’ Base VAD c/w Voice Sounder Part No. BF457C/CC/W
Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
C-TEC ActiV Conventional ‘O Class’ Base VAD c/w Voice Sounder Part No. BF455C/CC/W
Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Provides ‘O-R-3-2.5-17’ light distribution using the same lenses and electronics as our EN54-3 & 23 certified base sounder VAD.

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 17mA (0.5Hz) or 24mA (1Hz)

Alarm Current at 18Vdc = 18.5mA (0.5Hz) or 30mA (1Hz)

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
C-TEC ActiV Conventional Base Voice Sounder Part No. BF454C/CC/W
Superb sound intelligibility.

Choose from two evacuation voice messages and four evacuation alarm tones (your selected evacuation message will be preceded by the selected tone).

Alarm Current at 30Vdc = 10mA.

Alarm Current at 18Vdc = 8mA.

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download datasheet
Read more
C-TEC ActiV Conventional C-3-8.5 Base VAD c/w 96dB(A) Sounder Part No. BF456C/CC/W
Third-party certified to EN54-3 (Sounders) and EN54-23 (VADs).

Provides ‘O-R-3-2.5-17’ light distribution.

Ideally suited for use in corridors and other rectangular areas.

Impressive 96dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Three selectable VAD flash rates (0.5Hz, 1Hz, OFF)

Alarm Current at 30Vdc = 12.2mA (0.5Hz) or 19.5mA (1Hz)

Alarm Current at 18Vdc = 14.5mA (0.5Hz) or 25mA (1Hz)

Optional BF330CTLIDW white or BF330CTLIDR red cap available for stand-alone use.

Supplied with a BF431QCP quick connect plate and detector spur wires.

IP21C rated.

Download Images

Download datasheet
Read more
C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (deep base) Part No. BF430C/CC/DR
Third-party certified to EN54-3 (Sounders).

Impressive 100dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Alarm Current at 30Vdc = 5.5mA.

Alarm Current at 18Vdc = 3.8mA.

IP33C rated.

Manufactured in the UK by C-TEC.

Download datasheet
Read more
C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (deep base) Part No. BF430C/CC/DR (Copy)
Third-party certified to EN54-3 (Sounders).

Impressive 100dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Alarm Current at 30Vdc = 5.5mA.

Alarm Current at 18Vdc = 3.8mA.

IP33C rated.

Manufactured in the UK by C-TEC.

Download datasheet
Read more
C-TEC ActiV Conventional Hi-Output 100dB(A) Wall Sounder (shallow base) Part No. BF430C/CC/SR
Third-party certified to EN54-3 (Sounders).

Impressive 100dB(A) sound output @ 1m.

Includes 31 selectable primary tones and an optional secondary tone.

Two volume levels (high and low)

Alarm Current at 30Vdc = 5.5mA.

Alarm Current at 18Vdc = 3.8mA.

IP21C rated.

Manufactured in the UK by C-TEC.

Download datasheet
Read more

No items found.