Category: Accessories

Showing 33–48 of 135 results

wishlist

C-TEC Fire Alarm IP66 Rated Enclosure for EVC302GF or EVC302F Outstations Part No. BF359/1
₦0.00
An attractive IP66 rated enclosure designed for use with a SigTEL EVC302GF or EVC302F flush mounting disabled refuge controller.

Includes a handle and mounting plate.

Measures 200 W x 302 H x 123mm deep.

Textured RAL 7035 (light grey) finish.

Also compatible with C-TEC’s EP210F remote status units.
Read more
wishlist

C-tec Fire Alarm Retrofit Decor Plate Part No. BF-DP
An easy-to-fit 152mm diameter mounting accessory for use with ceiling mounted ActiV or CAST devices.

Helps cover the decorating witness marks left by Grade D type Mains/Battery Alarms on system retrofits.

Includes multiple mounting holes and a large cable entry section.

Two K40x12 Pozi Flange PT retaining screws are supplied to secure the C-TEC ActiV or CAST device directly to the BF-DP
Read more
wishlist

CFP Relay Output Card (2 Output Per Zone Relays)

CFP Relay Output Card (2 Output Per Zone Relays) Part No. CFP766 An optional system expansion device for use with CFP702-4 Standard 2 Zone Fire Panels or CFP702-2 AlarmSense 2 Zone Fire Panels. Provides two output per zone relays which will changeover when the corresponding zone is in alarm (subject to certain conditions – for full details refer to …

CFP Relay Output Card (2 Output Per Zone Relays)Read More

Read more
wishlist

CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (8 Output Per Zone Relays)
₦0.00

CFP Relay Output Card (8 Output Per Zone Relays) Part No. CFP764 An optional system expansion device for use with CFP708-4 Standard 8 Zone Fire Panels or CFP708-2 AlarmSense 8 Zone Fire Panels. Provides eight output per zone relays which will changeover when the corresponding zone is in alarm (subject to certain conditions – for full details refer to …

CTEC Fire Alarm CONVENTIONAL CFP Relay Output Card (8 Output Per Zone Relays)Read More

Add to cart
Sale!

wishlist

CTECH Economy REMOTE Status Unit FOR EXTINGUISHER Part No. EP211
Original price was: ₦95,000.00.Current price is: ₦85,000.00.
Designed to connect to the EP203 Automatic Extinguisher Panel to provide remote system status indication via three LEDs.

Includes a mode (auto/manual) keyswitch.

Mounts on a standard UK single gang 25mm flush or surface back box.

Max. 8 economy status units per EP203 panel.

Download datasheet
Add to cart
wishlist

Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface Technology

Upgrade your fire safety system with the Gent Vigilon Single Channel Mains Switching Interface with Enclosure – S4-34401. Engineered for seamless integration with the Vigilon system, this interface unit delivers heavy-duty relay switching for both 24V and 230V applications. Dive into the details of this cutting-edge product designed to elevate your building controls and damper …

Elevate Fire Safety with Gent Vigilon S4-34401: Advanced Interface TechnologyRead More

Read more
wishlist

Elevate Safety with S-Quad Multifunction Devices | White S4-911-V-VAD-HPW | Advanced Sensors and Visual Alarms

The S-Quad range of multifunction devices includes sensors with sounder, speech and EN54-23-certified visual alarms. This allows the maximum flexibility for designers providing cover for a building. The advanced sensing technology is enhanced with a device that can alert building occupants with a highly visible visual alarm and a recorded voice message to ensure all occupants are alerted to an emergency.

Innovative design has allowed the LED visual alarm to be built into the centre of the sensor with the sounder and speech circuits inside providing a neat and aesthetic solution to multi-function devices.

Read more
wishlist

Enhance Fire Safety with Gent S3 Voice Sounder – S3-V-R | Loop Powered System

Gent S3 Voice Sounder with Red Body – S3-V-R
S-Cubed offers a comprehensive range of loop powered alarm sounders with integrated voice and EN54-23 certified visual alarms. Combined with flexible configuration from the Gent by Honeywell fire control panels, this loop powered device can give a differentiated combination of audible and visual alarms for alert and general evacuation. Very low power consumption means that the Vigilon system offers more high performance sounders and VADs on the loop than any other manufacturer

Read more
wishlist

Enhance Fire Safety with Gent S4-901 Sensor Sounder – Intelligent Technology for Swift Response!

Gent S4-901 CO Dual Optical Heat Sensor

A new concept in fire detection – a truly intelligent analogue sensor combining exceptional computing power in the sensor as well as the panel to achieve an extremely fast response to a real fire whilst minimising the risk of false alarms.

Read more
wishlist

Enhance Security with Gent S4-3480 7 Vigilon Key-Switch Call Point – Key Operated for Swift Response

Enhance your fire safety system with the Gent S4-34807 Vigilon Key-Switch Call Point. This key-operated manual call point is designed for use with the Vigilon and Nano systems, providing a secure alternative where traditional break glass models might be susceptible to unauthorized activation. With easy installation on standard recessed single back boxes or bespoke red …

Enhance Security with Gent S4-3480 7 Vigilon Key-Switch Call Point – Key Operated for Swift ResponseRead More

Read more
wishlist

Ensure Uninterrupted Connectivity with Gent’s VS-CABLE-24 Replacement Ribbon Cables for VIGPLUS-24 and VIGPLUS-72 Panels

Gent VS-CABLE-24 Replacement Ribbon Cables for VIGPLUS-24 and VIGPLUS-72 Panel

The VS-CABLE-24 is replacement Ribbon Cables for the VIGPLUS-24 and VIGPLUS-72 Panels.

Read more
wishlist

Gent Fire Alarm Spare Key for Vigilon, Compact and SenTRI Panel Door (Singular) VS-KEY-S

DESCRIPTION

Gent VS-KEY-S Spare Key for Vigilon, Compact and SenTRI Panel Door (Singular)

The VS-KEY-S is a spare or replacement key which has been designed for use on the Gent Vigilon and Compact doors.

The VS-KEY-S also be used with the doors on the SenTRI 2 and SenTRI 4 fire alarm control panels from the SMS range.

Read more
wishlist

Gent 4 Channel Interface Channel Module- S4-34450

Description
Vigilon’s range of loop powered interfaces offer
a comprehensive range of connectivity options
with critical plant and other safety systems
Vigilon can accommodate a high quantity of loop powered interface units
offering fexible range of inputs and outputs from the FD&A system from
plant control and signalling other systems in a fi re, to linking with other
emergency management systems such as sprinklers or security systems.

Read more
Sale!

wishlist

Gent Addressable Fire Alarm Terminal Node for Vigilon Panel Networks COMPACT-NODE
Original price was: ₦3,200,000.00.Current price is: ₦3,093,000.00.
DESCRIPTION

Gent COMPACT-NODE Compact Plus Terminal Node for Vigilon Panel Networks

The Gent Compact Plus Terminal Node is designed for use with Vigilon Panel Networks.

Key Features

Supplied in the colour Black

Designed for use with Vigilon panel networks
Add to cart
wishlist

GENT BY HONEYWELL Fire Alarm (Morley) HLSPS50 5.0 Amp Power Supply Unit EN54-4

DESCRIPTION

Morley HLSPS50 5.0 Amp Power Supply Unit EN54-4

5.0 Amp PSU designed to meet the requirements of EN54-4. This range of PSUs includes all of the necessary monitoring and standby capability demanded by EN54-4. Each unit comes within the same size steel enclosure for ease of use, offering 2.5A or 5A alarm capability.

Read more
wishlist

GENT CONVENTIONAL Fire Alarm IP65 Electronic Sounder Red (100 dBa) – C3IP-SN-R
₦0.00

The S-cubed range of alarm sounders incorporate sound, speech and strobe effects all in one range of alarm devices. The range offers all variants in the choice of two colours (red or white), with either a shallow base version sealed to IP31 or a deep base version sealed to IP55. All the low profile sounders …

GENT CONVENTIONAL Fire Alarm IP65 Electronic Sounder Red (100 dBa) – C3IP-SN-RRead More

Read more

No items found.